 ACCESSORIES
Parallel Arm Closers: Molded Full Cover
Installations
Exposed Back -- #8445 Molded Full Cover Decorative
Back Plate: For use on doors with glass lites where a closer with molded full
cover is installed and the closer back is exposed. This plate covers the back of the
installation to give a pleasing appearance from the reverse side.
Exposed Back/Narrow Top Rail -- #8448 Molded Full
Cover Drop Plate Kit: For use on doors with glass lites where a closer with
molded full cover is installed, and the back of the closer is exposed. Kit consists of an
8148 Drop Plate and an 8445 Decorative Back Plate. This covers the back of the
installation and gives a pleasing appearance from the reverse side.
Parallel Arm Closers: Metal Full Cover
Installations
Exposed Back -- #8545 Metal Full Cover Decorative
Back Plate: For use on doors with glass lites where a closer with metal full
cover is installed and the closer back is exposed. This plate covers the back of the
installation to give a pleasing appearance from the reverse side.
Exposed Back/Narrow Top Rail -- #8548 Metal Pull
Cover Drop Plate: For use on doors with glass lites where a closer with metal
full cover is installed on a narrow top rail, and the back of the cover is exposed. This
drop plate can be used to mount a closer on a top rail as narrow as 2-7/8" (73 mm) in
height. This plate covers the back of the installation to give a pleasing appearance from
the reverse side.
Parallel Rigid Arm Closers: Brackets for
Non-Hold-Open and Hold-Open Arms
Standard -- #2019S Spacer Block: For use
where a narrow frame soffit does not provide adequate support for the soffit plate.
Supplied as standard with all parallel rigid arm closers.
Flush Rabbeted Transom -- #2019L Angle Bracket:
For use where flush transom conditions prevent mounting of the standard soffit plate. This
bracket is used in combination with the standard soffit plate.
Parallel Rigid Arm Closers: Brackets for
Non-Hold-Open and Hold-Open Arms
Narrow Frame -- #6890 Support Bracket: For
use where the frame is narrow, and the soffit plate cannot be mounted directly to the
frame soffit or rabbet. Used in combination with the #6891 Spacer Block on blade stop
frames, to provide extra support and needed clearance of the blade stop.
Clearance/Support Blade Stop -- #6891 Spacer Block:
For use where the door frame has a blade stop and the soffit plate must be mounted on the
frame rabbet. This accessory is used in combination with the standard Spacer Block to
provide clearance of the blade stop.
Closer Mounting Plates: Where closer
mounting plates are required for Parallel Rigid Arm closers, refer to Parallel Arm Closer
Mounting Plates. |
