ACCESSORIES

Replacement Covers

1-3/4" high x 2-1/8" deep x 13" long

(44 mm x 54 mm x 330 mm)

Molded Slim Style Cover -- #8200P: Supplied with all Series 8200 or 8300 closers. Cover is non-handed and can be used on any regular arm, parallel arm, or top jamb mounted closer. Decal on inside of cover provides adjustable details. Cover fastens to closer with two attaching screws, included.

2-7/8" high x 2-1/8" deep x 13" long

(73 mm x 54 mm x 330 mm)

Molded Full Cover -- #8400P: Supplied with all Series 8400 closers. Cover is non-handed and can be installed on any regular arm, parallel arm, or top jamb mounted closer. Decal on inside of cover provides adjustable details. Cover fastens to closer with two attaching screws, included.

3-7/8" high x 2-1/8" deep x 13-5/8" long

(98 mm x 54 mm x 346 mm)

Metal Full Cover -- #8400M: Supplied with all Series 8400M/ 8500M closers. Available in sprayed finishes to order at no extra charge. Available in plated finishes at extra cost. See Finishes, page 8000-5. The cover notch for Top Jamb closers is factory prepared. Specify hand of door when ordering Top Jamb metal Full Covers. Decal on inside of cover provides adjustment details. Cover fastens to closer with two mounting clips and two attaching screws, included.

3-7/8" high x 2-1/8" deep x 13-5/8" long

(98 mm x 54 mm x 346 mm)

Wood Laminated Cover -- #8400W: Supplied with all Series 8400W/8500W closers. This metal cover is laminated with finegrained domestic or imported woods. The cover is supplied unfinished, so it can be finished on the job with the door and frame. This cover is non-handed, except for top jamb applications, since the shaft cutout must be factory prepared. Decal on inside of cover provides adjustment details. Order by specifying Wood Grain Laminate from page 8000-5. Specify hand of door when ordering Top Jamb covers. Cover fastens to closer with two mounting clips and two attaching screws, included.

Standard Arms

Non-Hold-Open Arm/Non-Handed 8020-1

Arm assembly becomes No. 8020-5 when 1618 Soffit Bracket is substituted for the standard arm shoe.

Hold-Open Arm/Non-Handed 8020-3

Arm assembly becomes No. 8020-8 when 1628H Soffit Bracket is added to adapt the standard arm for parallel arm mounting.

Fusible-Link Hold-Open/Handed 8020-4

Arm assembly becomes No. 8020-9 when 1628H Soffit Bracket is added to adapt the standard arm for parallel arm mounting.

For More Information

Contact your Norton representative or Norton^® Door Controls, A Division of Yale Security Inc., P.O. Box 25288, Charlotte, NC

28229-8010. Telephones: (800) 438-1951. In North Carolina: (704) 283-2101. FAX: (704) 289-2875 or (800) 338-0965.

Telex: 572356. In Canada, 3160 Orlando Drive, Mississauga, Ontario, Canada L4V 1R5. Telephone: (416) 672-6220.

FAX: (416) 672-9022. WATS: (800) 461-3007.