SERIES 8301/8501
ACCESSORIES
Regular Arm Closers:
Closer Mounting Plates
Narrow Top Rail -- #8146 Drop Plate: For use where the narrow top rail of
door prevents the closer from being mounted directly to the door surface. This drop plate
must be used for any Series 8301/8501 closer mounted on a top rail between 1-9/16"
and 2-7/16" (40 and 62 mm); in height, or any Series 8381/8581 closer mounted on a
top rail between 1-7/16" and 2-3/8" (37 and 60 mm) in height.
Concealed Door Holder -- #8146 Drop Plate: For use where a concealed door holder
prevents normal mounting of the closer to the door. This is the same plate used for narrow
rail mounting, but it is inverted for this application to permit the mounting screws to
clear the bottom of the door-holder preparation in the top rail of the door. This places
the center line of the plate's upper mounting screws at 2-3/16" (56 mm). From the top
of the door.
Regular Arm Closers:
Molded Full Cover Installations
Exposed Back -- #8445 Molded Full Cover
Decorative Back Plate: For use on doors with glass lites where a closer with molded full cover is
installed and the closer back is exposed. This plate covers the back of the installation
to give a pleasing appearance from the reverse side.
Exposed Back/Narrow Top Rail --
Exposed Back/Concealed Door Holder --
#8446 Molded Full Cover Drop Plate Kit: For use with molded full cover installation when an 8146 Plate is needed
as a drop plate on a narrow top rail, or as a clearance plate for a concealed door holder,
and the closer back is exposed. Kit contains an 8146 Drop Plate and an 8445 Decorative
Plate.
Regular Arm Closers:
Metal Full Cover Installations
Exposed Back -- #8545 Metal Full Cover
Decorative Back Plate: For use on doors with glass lites where a closer with metal full cover is
installed and the closer back is exposed. This plate covers the back of the installation
to give a pleasing appearance from the reverse side.
Concealed Door Holder -- #8546 Metal Full Cover
Drop Plate: For
use where a concealed door holder prevents the normal mounting of the closer to the door.
This plate permits the mounting screws to clear the bottom of the door-holder preparation
in the top rail of the door. This places the center line of the plate's upper mounting
screws at 2-3/16" (56 mm). From the top of the door. |
