SERIES 8301/8501
ACCESSORIES
Hold-Open Retrofit Adapter Plate
Converting Old Hold-Open Installations -- #2017
Adapter Plate: For use on old hold-open installations with 2-1/2" (64
mm). hole spacing on the holder bracket. Plate uses existing holes in either door or frame
and accepts the new hold-open bracket with 1 -3/4" (44 mm). hole spacing. For regular
or top jamb installations.
Regular Arm Closers:
Metal Full Cover Installations (cont'd.)
Exposed Back/Narrow Top Rail -- #8549 Metal Full
Cover Drop Plate Kit: For use with metal full cover installations, when an
8146 Plate is needed as a drop plate on a narrow top rail and the closer back is exposed.
Kit contains an 8146 Drop Plate and an 8545 Decorative Plate.
Top Jamb Closers:
Closer Mounting Plates
Low Ceiling Clearance -- #8146 Drop Plate: For use where low ceiling clearance
prevents normal top jamb mounting. This plate is used when clearance is from 1-7/8"
to 2-7/8" (48 mm to 73 mm). Where ceiling clearance is less than 1 -7/8" (48 mm)
see #8148 Drop Plate detailed in the following text.
Overhead Door Holder -- #8146 Drop Plate: For use where a surface or concealed
overhead door holder prevents normal top jamb mounting. This plate drops the closer and
allows arm mounting screws to clear the bottom of the door holder. This places the center
line of the arm mounting screws at 2-7/8" (73 mm) from the top of the door. |
