SERIES 8301/8501

ACCESSORIES

Parallel Arm Closers: Brackets for Non-Hold-Open Arms (cont'd.)

Flush Transom -- #2022 Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of a soffit plate. Used in combination with the 1618A soffit plate, or it may be used in combination with the 2018S soffit plate when it is necessary for the closer arm to clear a separate overhead door holder.

Extra-clearance -- #2018S Offset Soffit Plate: For use where the need for additional clearance prevents use of the standard soffit plate. This plate mounts to the frame soffit to provide up to 1-1/2" (38 ram) of clearance when a separate overhead door holder is used. Standard mounting requires a 2-5/8" (67 mm) wide frame soffit. It may also be used where unusually high frame stops or weather-stripping prevent the use of other soffit plates.

Parallel Arm Closers: Brackets for Hold-Open Arms

Parallel Hold-Open -- #1628H Adapter Plate: This Adapter Plate is supplied standard with all hold-open closers to permit parallel arm mounting. It is used in combination with the standard hold-open mounting shoe. It can be mounted where the frame soffit is as narrow as 1" (25 mm).

Flush Transom Hold-Open -- #2022 Angle Bracket: For use where rabbeted or flush transom conditions prevent installation of the standard 1618H hold-open adapter plate. It can also be used to convert regular arm or top jamb hold-open arms to parallel arm installation.