SERIES 8301/8501

ACCESSORIES

Parallel Rigid Arm Closers: Brackets for Non-Hold-Open and Hold-Open Arms

Standard -- #2019S Spacer Block: For use where a narrow frame soffit does not provide adequate support for the soffit plate. Supplied as standard with all parallel rigid arm closers.

Flush Rabbeted Transom -- #2019L Angle Bracket: For use where flush transom conditions prevent mounting of the standard soffit plate. This bracket is used in combination with the standard soffit plate.

Parallel Rigid Arm Closers: Brackets for Non-Hold-Open and Hold-Open Arms (cont'd.)

Narrow Frame -- #6890 Support Bracket: For use where the frame is narrow, and the soffit plate cannot be mounted directly to the frame soffit or rabbet. Used in combination with the #6891 Spacer Block on blade Stop frames, to provide extra support and needed clearance of the blade stop.

Clearance/Support Blade Stop -- #6891 Spacer Block: For use where the door frame has a blade stop and the soffit plate must be mounted on the frame rabbet. This accessory is used in combination with the standard Spacer Block to provide clearance of the blade stop.

Closer Mounting Plates: Where closer mounting plates are required for Parallel Rigid Arm closers, refer to Parallel Arm Closer Mounting Plates.