CLOSERPLUS
SERIES CLP-1601 (BF)
Catalog Numbers and Dimensional
Data
| CLOSERPLUS
CATALOG NUMBERS |
DIMENSIONAL INFORMATION
SHOWN IN (INCHES ML) |
| R MINIMUM TOP RAIL OR
DOOR |
T TEMPLATE POSITION FOR
HOLD-OPEN OR STOP AT L STED ANGLE |
| STOP ONLY |
THUMBTURN HOLD-OPEN |
HEX-KEY HOLD-OPEN |
WITHOUT DROP PLATE |
WITH DROP PLATE |
85° |
90° |
95° |
100° |
105" |
110" |
| CLP-1601 |
CLP-1601-T |
CLP-1601-K |
4-1/2 (114) |
2-5/8 (67) |
8-3/4 (222) |
8 (203) |
7-1/4 (184) |
6-5/8 (168) |
6 (152) |
5-3/8 (137) |
| CLP-1601BF |
CLP-1601BF-T |
CLP-1601BF-K |
All dimensions are for reference only.
Closer Power Adjustment
The following charts are a guide to set the CloserPlus door
closer power. Installer must further adjust the closer to accommodate door, frame, degree
of opening, environment or "Code" requirements. Closer factory set at minimum
power (zero turns).
Series CLP-1601BF Accessibility
Code Power Range
Power of control can be adjusted to conform to sizing
requirements outlined In A.D.A. and ANSI A117.1-1986, Specifications for Making Buildings
and Facilities Accessible To and Usable By Physically Handicapped People.
| Maximum Door Size Wood
or Metal Inches (meters) |
Power Settings* Number
of 360° Turns of 3/16" Hex Drive Power Adjustment Shaft |
CloserPlus Catalog
Numbers |
| Interior |
Exterior |
Stop Only |
Thumbturn Hold Open |
Hex Key Hold Open |
| 34 (0.85) |
2 |
8 |
| CLP-1601BF |
CLP-1601BF-T |
CLP-1601BF-K |
| 36 (0.90) |
2 |
9 |
| 40 (1.00) |
3 |
12 |
| 44(1.10) |
4 |
Use 1601 Closer |
| 48 (1.20) |
5 |
| *18-360° Turns Maximum Available |
* Closer is factory set at zero turns or the lowest
setting.
Series CLP-1601 Normal Power Range
Power of control can be adjusted to conform to conventional
sizing requirements outlined in ANSI At 56.4-1986. Standards for Door Controls - Closers.
| Maximum Door Size Wood
or Metal Inches (metere) |
Power Settings* Number
of 360° Turns of 3/16" Hex Drive Power Adjustment Shaft |
CloserPlus Catalog
Numbers |
| Interior |
Exterior |
Stop Only |
Thumbturn Hold Open |
Hex Key Hold Open |
| 34 (0.85) |
3 |
5 |
| CLP-1601 |
CLP-1601-T |
CLP-1601-K |
| 36 (0.90) |
5 |
7 |
| 40(1.00) |
7 |
10 |
| 44(1.10) |
10 |
14 |
| 48 (1.20) |
13 |
16 |
| *18-360° Turns Maximum Available |
* Closer is factory set at zero turns or the lowest
setting.
Accessories: For Arm Mounting accessories, see page CloserPlus-20.
Narrow Top Rail — #1688 Drop Plate:
For use with Series CLP-1601 and 1601 BF CloserPlus. For use where a narrow top rail
prevents the closer from being mounted directly to the door surface. This drop plate can
be used to mount the closer on a top rail as narrow as 2-5/8" (67mm)in height. |
