architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Norton Door Control   Norton CloserPlus™ Door Controls  

Norton CloserPlus¿ Door Controls - Page 9

   

Norton CloserPlus™ Door Controls

Yale Security Inc.

CLOSERPLUS

SERIES CLP-7500

Catalog Numbers and Dimensional Data

CLOSERPLUS CATALOG NUMBERS DIMENSIONAL INFORMATION SHOWN IN INCHES (MILLIMETERS)
R MINIMUM TOP RAIL OF DOOR S MINIMUM TOP RAIL CLEARANCE T TEMPLATE POSITION FOR HOLD-OPEN OR STOP AT LISTED ANGLE
STOP ONLY THUMBTURN HOLD-OPEN HEX-KEY HOLD-OPEN WITHOUT DROP PLATE WITH DROP PLATE 85° 90° 95° 100° 105° 110°
CLP-7500 CLP-7500-T CLP-7500-K 5-7/8 (149) 2-3/8 (60) 6-1/2 (165) 9-5/8 (244) 8-3/4 (222) 8-1/8 (206) 7-3/8 (187) 6-7/8 (175) 6-1/4 (159)
CLP-7500BF CLP-7500BF-T CLP-7500BF-K

All dimensions are for reference only. Dimensions are typical for CloserPlus units installed with any of the catalogued door closer covers.

Closer Power Adjustment

Closer Power Adjustment

The following charts are a guide to set the CloserPlus door closer power. Installer must further adjust the closer to accommodate door, frame, degree of opening, environment or "Code" requirements. Closer factory set at minimum power (zero turns).

Series CLP-7500-Normal Power Range

DOOR SIZE

WOOD OR METAL

INCHES (METERS)

 POWER ADJUSTMENT

FULL 360° CLOCKWISE TURNS OF ADJUSTMENT NUT

 CLOSERPLUS CATALOG NUMBERS
INTERIOR EXTERIOR STOP ONLY THUMBTURN HOLD OPEN HEX-KEY HOLD-OPEN
28-32 (0.70-0.80) 0 2 CLP-7500 CLP-7500-T CLP-7500-K
3336 (0.85-0.90) 2 5
37-42 (0.95-1.05) 5 8
43-48 (1.10-1.20) 8 11

MAXIMUM TURNS AVAILABLE             15

Closer power can be adjusted to conform to conventional sizing requirements outlined in A.D.A. and ANSI A156.4-1986, Standards for Door Controls-Closers.

Series CLP-7500BF—Accessibility Code Power Range

DOOR SIZE

WOOD OR METAL

INCHES (METERS)

 POWER ADJUSTMENT

FULL 360° CLOCKWISE TURNS OF ADJUSTMENT NUT

 CLOSERPLUS CATALOG NUMBERS
INTERIOR EXTERIOR STOP ONLY THUMBTURN HOLD-OPEN HEX-KEY HOLD-OPEN
28-30 (0.70-0.75)   0 CLP-7500BP CLP-7500BF-T CLP-7500BF-K
 
31-36 (0.80-0.90) 0 3
37-42 (0.95-1.05) 4 8
43-48 (1.10-1.20) 7 11

MAXIMUM TURNS AVAILABLE            15

Closer power can be adjusted to conform to the sizing requirements outlined in A.D.A. and ANSI A117.1-1986, Specifications for Making Buildings and Facilities Accessible To and Usable By Physically Handi-capped People.

3-7/8" high x 2-1/8" deep x 13-5/8" long (98mm x 54mm x 346mm)

Molded Cover — #7500P: Standard. Available in any of the "Sprayed Finishes" listed on page CLOSERPLUS-3. Cover fastens to closer with two attaching screws, included.

3-7/8" high x 2-1/8" deep x 13-5/8" long (98mm x 54mm x 346mm)

Metal Cover—#7700M: Optional. Available in any of the "Plated Finishes" listed on page CLOSERPLUS-3. Cover fastens to closer with two attaching screws, included.

3-7/8" high x 2-1/8" deep x 13-5/8" long (98mm x 54mm x 346mm)

i Wood Laminated Cover — #7700W: Optional. ' Available in any of the "Wood Finishes" listed on i page CLOSERPLUS-3. Cover fastens to closer with two attaching screws, included.



Request for Information / Request a Catalog from Norton Door Control
 
 
 
To request more information from Norton Door Control, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.