 A member of the Yale Security Group
COVER/ACCESSORIES FOR SURFACE CLOSERS
Drop Plates & Brackets for Parallel Arm Installation
Parallel Arm Drop Plate
Narrow Top Rail #7778 - Drop Plate: For use where a narrow
top rail prevents the closer from being mounted directly to the door surface. This drop
Plate can be used to mount a closer on top rail as narrow as 2-1/2" (64mm) in height.
Spacer Block #2019S
Standard - #2019S Spacer Block: For use where a narrow frame
soffit does not provide adequate support for the soffit plate. Supplied as standard with
all parallel rigid arm closers.
6890 Angle Bracket
Narrow Frame - #6890 Support Bracket: For use where the frame
is narrow, and the soffit plate cannot be mounted directly to the frame soffit or rabbet.
Used in combination with the #6891 Spacer Block on blade stop frames to provide extra
support and needed clearance of the blade stop.
7770M Cover
Security Series Door Closers Extruded Cover
Spacer Block #6891
Clearance/Support Blade Stop - # 6891 Spacer Block: For use
where the door frame has a blade stop and the soffit plate must be mounted on the frame
rabbet. This accessory is used in combination with the standard Spacer Block to provide
clearance of the blade stop.
Angle Bracket #2019L
Flush Rabbeted Transom - #2019L Angle Bracket: For use where
flush transom conditions prevent mounting of the standard soffit plate. This bracket is
used in combination with the standard soffit plate.
TORX Screwdriver Kit
TORX screw fasteners are highly tamper-resistant. They are provided
with all security closers and closers with security arms only. Screws require a
hex-lobular drive which mates to security pin in screw head. Three different size bits are
available along with a TORX handle. A TORX tool kit is available that contains a handle
and six bits: T10, T15, T20, T25, T27 and T30.
TORX® is a registered trademark of Textron, Inc.
|
