architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Norton Door Control   Norton UnitrolŪ Door Controls  

Norton UnitrolŪ Door Controls - Page 11

   

Norton UnitrolŪ Door Controls

Norton Series UNI-J1600BC

Unitrol Door Controls
Top Jamb Installation

Catalog Numbers and Door Sizes

DOOR SIZE

WOOD OR METAL

INCHES (METERS)

UNITROL CATALOG NUMBER
INTERIOR EXTERIOR STOP ONLY ARM HOLD-OPEN ARM x SPECIFY FRAME REVEAL
28-34 (0.70-0.85) -- UNI-J1602BC UNI-J1602BC-H
35-42 (0.90-1.05) 28-34 (0.70-0.85) UNI-J1603BC UNI-J1603BC-H
43-48 0.10-1.20) 35-42 (0.90-1.05) UNI-J1604BC UNI-J1604BC-H
49-54 (1.25-1.35) 43-48 (1.10-1.20) UNI-J1605BC UNI-J1605BC-H
-- 49-54 (1.25-1.35) UNI-J1606BC UNI-J1606BC-H

Door sizing information is based on installation on standard weight doors, 7'0" (2.13m) high 1-3/4" (44mm) thick: hung on anti-friction hinges and operating under normal conditions. Unusual winds or drafts will generally require the use of a larger size closer.

Dimensional Data

UNITROL DOOR CONTROL DIMENSIONAL INFORMATION SHOWN IN INCHES (MILLIMETERS)
P

MINIMUM CEILING CLEARANCE

S

MINIMUM TOP RAIL CLEARANCE

T

TEMPLATE POSITION FOR HOLD-OPEN AT LISTED ANGLE OR DEAD STOP AT LISTED ANGLE PLUS 5°

U

CLOSER LENGTH

WITHOUT DROP PLATE WITH DROP PLATE WITHOUT DROP PLATE WITH DROP PLATE 85° 90° 95° 100° 105° 110°
UNI-J1602BC(H) UNI-J1603BC(H) 2-5/8 (67) 1-3/4 (44) 2-3/4 (70) 3-5/8 (92) 8-7/8 (225) 8-1/8 (206) 7-1/2 (191) 7-1/8 (181) 6-1/2 (165) 6-1/4 (159) 8-7/8 (225)
UNI-J1604BC(H) UNI-J1605BC(H) UNI-J1606BC(H) 9-3/4 (248)

All dimensions are for reference only.

Accessories

Low Ceiling Clearance -- #1637 Drop Plate: For use with UNI-J1602BC and UNI-J1603BC Unitrols where low ceiling clearance prevents normal top jamb mounting. This plate is used when the clearance is between 1-3/4" and 2-5/8" (44mm and 67mm).

Low Ceiling Clearance -- #1687 Drop Plate: For use with UNI-J1604BC, UNI-J1605BC and UNI-J1606BC Unitrols where low ceiling clearance prevents normal top jamb mounting. This plate is used where clearance is between 1-3/4" and 2-5/8" (44mm and 67mm).



Request for Information / Request a Catalog from Norton Door Control
 
 
 
To request more information from Norton Door Control, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.