 |
Model 12000A Dial-A-Drink® Adjustable
Bubbler accommodates line pressures from 20 to 120 psi. Model
12000AL is for low line pressure of 5 to 20 psi |
 |
Model 12000A Dial-A-Drink® Adjustable
Bubbler with chrome-plated brass housing. Part 030774-016...Model 12000A Part 030774-014...Model 12000AL |
 |
Model 12000A Dial-A-Drink® Adjustable
Bubbler with Flex Guard plastic housing. Part 030774-006...Model 12000A Part 030774-015...Model 12000AL |
 |
"Soft Touch" Bubbler Handle for the
handicapped. This is an optional handle for Adjustable Bubbler Models 12000A and 12000AL
that provides user convenience for the handicapped as well as the general public. Part 023754-001 |
 |
Drinking Water Filters QC2-AC And S-100. These
precoat type filters remove dirt, cloudiness particles, and unpleasant odors and tastes.
S-100 takes an 18 1/2" vertical installation space. QC2-AC requires 14 1/8". All models are three-part units: a head assembly with an integral shut-off valve, an adjustable mounting bracket, and a replaceable quick-change cartridge. Model QC4-H (not shown) has a special water stabilizer in the
built-in feeder to reduce formation of lime scale in equipment where a low water flow rate
is used. It takes an 18 1/2" vertical installation space. |
 |
Overhead Waste Drain Pump delivers waste water
to the overhead drain system (maximum height 40'). It can be used with all On-A-Wall and
Free-Standing models except water cooled and explosion proof. With On-A-Wall models, the
pump must be applied externally to the wall below the unit. Part 019307 |
 |
Glass Fillers (029603-006, Push Down, left; 029603-005, Push Back, center; 029603-004, Push handle, right). All three models offer heavy chrome-plated copper construction. |
 |
Trim Bezel. The trim bezel is made of
heavy-duty plastic and is used to cover wall surface discolorations between the cooler and
wall. Fits EBCO cooler series PLFWM, PLFM, PLFSK, PAM. Part 031364-001
|
The LeadOUT filter offers a high absorption efficiency for removing lead from incoming water to non-detectable levels (less than 5 parts-per-billion as measured by EPA TEST method 239.2). And it lasts, too: filter capacity is 500 gallons of incoming water at 150 parts-per-billion of lead.
Kit for Floor Model Coolers...029797-001
Kit for On-A-Wall Model Coolers...029793-001
Kit for Radii, Modular and Fully Recessed Models...029918-003
Filter For Replacement Only...029681-002
