Claims for Shortage or Damage in Transit: All claims for shortage must be made within 10 days of receipt of goods. Consignee assumes the risk of loss or damage in transit.

Mill Lengths: Most extrusions are available in mill lengths. Cut lengths over 12 feet are charged as mill lengths.

Ordering Information: Please order material by catalog number, specifying length required per piece and the number of pieces. Most products are stocked in standard sizes. If it is not practical to furnish the size ordered, the next larger size will be furnished and charged.

Terms: All prices are F.O.B. Factory. To customers with satisfactory and/or prior approved credit and account status, terms of 2% 10th prox., net 20th, will be allowed. Please enclose an account application prior to or with your initial order.

New Credit Card Capabilities: Visa and Mastercard are now accepted. Payment terms are NET.

New Freight Terms: All orders are F.O.B. Factory. For NET orders of $650.00 or more, freight will be prepaid in the continental U.S. for shipment the most economical way. For shipments to Hawaii on NET orders of $950.00 or more, freight will be prepaid the most economical way. A freight allowance of $12.00/cwt will apply on shipments to Canada or Alaska for net orders of $650.00 or more.

New Minimum Order Level: A surcharge of $5.00 will be added to NET orders less than $35.00.

Returns and Allowances: No merchandise will be accepted for return or credit unless prior written approval is obtained. Returned merchandise must be recent sale, in restockable/resalable quantity, size and condition. A minimum 30% charge plus freight charges will be made for returns. Material which is not in standard stock sizes, is made to special order has a custom finish, or has been sold at special consideration or as a closeout, is not returnable.

Cancellation Charges: Cancelled orders for special material, non-stock or special sizes are subject to cancellation charges, based on factory expense and material use.

Orders are subject to acceptance by Pemko. Prices and terms are subject to change without notice.

Materials Information
Metals and Finishes: Pemko's extruded metal products are made from: 6063 and 6463 aluminum alloys, and CDA alloy C38500 architectural bronze (brass). Roll formed metal products are made from stainless steel, high strength special purpose zinc alloy, 70-30 yellow brass or 85-15 red brass. Roll formed aluminum weather-stripping is produced from various alloys selected for the particular properties required. Our products 357SC and 357SP are made from rolled steel; the 357SS is made from 304-stainless steel. See the charts (below) for all finish designations. If you do not see the option you require, please inquire with our customer service department about the feasibility of a custom finish. Also, a "Finish Designations" chart is shown at the bottom of every pair of pages as a key for one or more of the products on those pages. For clarity and easy reference, please note that any letter which is a code for a finish will be blue in color.

Inserts (seals) and Other Materials: Pemko supplies many products with weatherstripping inserts (seals). Some products are made completely from non-metallic materials. Please refer to specific parts throughout the catalog for complete information. Silicon seal (S) inserts are made from a special silicone rubber formulation. Silicon Seal attributes can be found on page 13 under S44 and S88. PemkoPrene™ (PK) inserts are made from a proprietary blend of thermoplastic elastomer. PemkoPrene™ attributes can be found on page 13 under PK22, PK33 and PK55. All vinyl (V) parts and inserts are extruded from the highest quality virgin vinyl and comply with all the requirements specified in Commercial Standard CS 230-60, as developed by the U.S. Department of Commerce. See the chart (below) for all insert (seal) designations. Also, the available inserts (seals) for each individual product are now shown adjacent to each individual product.

Fabrications Options: Pemko offers many fabrication options to fit specific job requirements including beveling, special cuts, rips, tack welds, lead lining, L-notches, U-notches, half notches, full notches, mill and drill, drill, and single and double miter skirts. Please consult our customer service and/or our engineering departments for details. Custom fabrications are subject to engineering design costs and are quoted on a time and material basis.

Fastener Options: Most products are furnished with standard fasteners at no charge; please refer to specific products or product categories for standard fastener details. When specified, Pemko will furnish special types of available screws and anchors. All anchors and special screws are supplied at an extra cost.

PEMKO MFG. CO.  • VENTURA, CA (800) 283-9988 •MEMPHIS, TN (800) 824-3018