The PYROSCAT FP Duct Wrap System is a flexible, fire
barrier system designed to provide a one or two-hour fire rating along with a zero
clearance to combustibles fire protection in grease and air duct applications. The system
consists of two layers of PYROSCAT FP Duct Wrap (foil laminated or unfoiled)  applied to the grease
ducts or air ducts in accordance with Premier's Installation Specifications.The system incorporates fire protection-grade Ceramic Fiber Blankets
manufactured from inorganic oxides using the proprietary Erwin Spinning Process. This
process produces a lightweight, super strong, flexible, inert needled blanket that is
inherently fire resistant. The product is produced in our ISO 9002 Certified facility with
UL listed components and is manufactured to strict tolerances, ensuring proper thickness
and density control for fire-critical applications.
All PYROSCAT FP Duct Wrap and blanket products are available in
foiled or unfoiled versions as listed below:
The PYROSCAT FP duct Wrap System was tested and approved at
Underwriters Laboratories per UL YYET for Grease Duct Enclosures in accordance with SBCCI
Acceptance Criteria. The UL YYET standard requires the system to meet the following
specifications:
UL 263 - An external full scale fire test for 1 and/or 2 hour
fire resistance duct enclosures and through penetrations per ASTM E-119 with hose stream.
UL 1978 - an abnormal temperature test performed in
accordance with UL Subject 1978 Proposed First Edition of the Standard for Grease Ducts.
UL 723 - A test for surface burning characteristics per ASTM
E-84.
UL 1479 - Through penetration fire stop tests per ASTM
E-814.
When compared to other flexible wrap systems, PYROSCAT FP Duct Wrap
and FP Blanket have the added advantage of exhibiting greater physical strength, plus
(when opting for foiled blanket) the foil laminate is bonded directly to the blanket. This
gives the installers a more durable system which is easier to handle, fabricate and faster
to install.
Testing and Approvals
Underwriters Laboratories
NFPA
BOCA
SBCCI
DOT Acceptance 49 CFR
US Coast Guard 46 CFR 164.009
ASTM E-136
Features
- Flexible, lightweight wrap protection system.
- UL classified in three grades: F0, F1, & F2. all grades are
totally non-combustible.
- Continuous temperature service range of 2300 °F; melting point
>3000°F.
- Very high insulating value.
- Does not rely on the release of chemical water during fire conditions
to provide fire protection.
- Very high tensile strength - exceptionally long, flexible filaments,
thoroughly and uniformly intertwined.
- Needle-felted for greater strength and durability.
- Very high resistance to tearing and abuse.
- Resists most chemical attack. Unaffected by hydrocarbons or water.
Thermal and physical properties are restored upon drying.
- Contains no organic binders. No fumes or off-gassing at normal
operating or fire condition temperatures.
- Available in 24" or 48" widths.
Technical Support
Premier also provides the technical assistance needed to solve the
various passive fire protection problems associated with just about every building or
construction project. For detailed application information, please refer to the
publication "Guidelines for Installation of PYROSCAT." If you require additional
information or assistance, contact your nearest Premier or PYROSCAT representative. |
