OPTIONAL DOOR FRAMES/STYLES AND COLORS

Style "R" -1/2" deep regress (Aluminum). "RW" White, "RB" Black.	Style "S" -flush frame (Aluminum). "SW" White, "SB" Black.

Style "D" -1/2" flush frame (Steel) Tamper proof available Specify suffix "-TP". "DW" White, "DB" Black.	Style "MW" - White Enamel with Black Reveal. Not available in 6" wide Troffer (P-8601 - P-8602).

LATCH SIDE	HINGE SIDE

Units are available in four frame styles (R,S,D, or MW) as illustrated. Door Frames may be ordered in either "all white" finish "W" or "all black" finish "B". To specify, add style and finish designation to catalog number.EX: P-8624-02RS-PRA-RB

Special frame finishes available upon request.

Fixture Body Flange finished in white enamel on mounting styles X-2, X-3 and X-4.

*"BX" denotes BIAX

**May be used as "MASTER-REMOTE", see brochure in Recessed section. Specify as follows: P-8623-96CTETW(2)-MR9-PRA-RW-X1. This describes a system with two 2' x 4' 3-lamp fixtures with OCTIC T-8, 2-lamp Electronic Ballasts. The master will have two ballasts and the remote one. The system will be furnished with a 9' whip. Fixtures will have a pattern 12 lens in a regressed white door frame and will be in a T-bar ceiling.

EMERGENCY APPLICATIONS: All fixtures are available with Emergency Components. Specify prefix "PEL" (600 lumen output) or "PEH" (1200 lumen output). See Emergency brochure in Technical Data section.

SPECIFICATIONS

TYPE: P-8600- 6", 1', 2', 3' or 4' wide troffer with a hinge an spring-loaded latch door frame. Frame is available in a choice of styles (flush, regressed or "floating door" appearance) and colors.

LENS/LOUVER: Available in a wide variety of lenses/louvers.

CONSTRUCTION: Die-formed, prime quality steel.

FINISH: Baked White Enamel.

LABELS: UL, IBEW.

PRA  Prismatic Acrylic Lens, pattern 12

P19A  Prismatic Acrylic Lens, pattern 19

PRA  Prismatic Acrylic Lens, pattern 12

PWS  Parabolic egg-crate Louver (1/2" x 1/2" x 1/2")

PW2S  Parabolic egg-crate Louver (1/2" x 1/2" x 1")

WA  White Acrylic Diffuser

For Aluminum Body add suffix "-AL".

Side ballast compartments are also available. For single side specify suffix "-SC".

For double side specify suffix"-2SC".

For Heat Exchange specify suffix "-HE".

(Heat Exchange not available in 6" Troffer)

For Wet Location see brochure in Special Applications.

For Electronic Ballast add "E" to RS or CT.

Ex: RSE or CTE.

For a 3- or 4-lamp Electronic Ballast add "X" to RSE or CTE. Ex: XRSE or XCTE.

For complete listing, see BALLAST DESIGNATION CHART in Technical Data section.

1774 E. 21st ST. LOS ANGELES, CA 90058 213.746.0360 Fax: 213.746.8838