DISTRIBUTION
- FINISHING PLATE: Conceals hardware and is
removable for through wiring. (Matches module finish.)
- END PLATE: Die-cast with rounded edge to
match housing. Open center for wiring access. Square hole for 1/4"-20 carriage bolts
simplify installation. (Matches module finish.)
- HOUSING: 6" square extruded aluminum
(5/32" wall 6463-T5 alloy) for maximum finishing and structural quality. Standard
modules are 4', 8' and 12' long. Consult factory for custom lengths. Specify a standard
finish, or supply a color chip for Prudential Lighting to match.
- LUMINAIRE: Choose from the standard
distributions shown in cross section for direct, indirect, wall wash, or direct/indirect
modules. Prismatic lens or Parabolic louver/reflector available. Baked gloss White Enamel
internal parts. Standard modules are for 4' medium Bi-Pin Rapid Start fluorescent lamps
(unless otherwise specified).
| FIXTURE SERIES |
DISTRIBUTION |
MOUNTING |
LAMP ROW |
NOMINAL LENGTH
(FEET) |
RAPID START (430
MA) ADD |
OCTIC T-8 (265
MA) ADD |
LENS / LOUVER |
| P-10 |
-D1 -D2
-D3
-D4 |
-M1 (Surface) -M2 (Stem)
-M3 (Cable)
-M4 (Wall Bracket)
-M5 (Wall Spacer) |
-1 -2 |
-04 -05*
-06
-08
-10*
-12 |
RS RSE
RSTW
RSETW
XRSETW |
CT CTE
CTTW
CTETW
XCTETW |
-BLA -BLW
-PRA
-SPL
-3EA |
*CT only
EMERGENCY APPLICATIONS: All fixtures are
available with Emergency Components, Specify prefix "PEL" (600
lumen output) or "PEH" (1200 lumen output). See Emergency
brochure in Technical Data section.
SPECIFICATIONS
TYPE: Modular 6" square extruded
aluminum fluorescent lighting system.
LAMP: Rapid Start T-12 or Octic T-8
fluorescent (by others).
LENS/LOUVER: Available in a wide variety
of lenses/louvers.
REFLECTOR: Die-formed prime quality steel
with high reflectance Baked White Enamel.
CONSTRUCTION: Housing is 5/32" thick
extruded aluminum with die-formed steel interior.
FINISH: Baked White Enamel (Standard).
Optional finishes available.
LABELS: UL, IBEW.
| BLA |
Blade Louver Aluminum-Clear Anodized finish
1" high by 1"O.C. |
| BLW |
Blade Louver Aluminum - White Enamel finish
1" high by 1" O.C. |
| PRA |
Prismatic Acrylic Lens, pattern 12 |
| SPL |
Silver Parabolic Blade Louver 1.5" high
by 2.4 O.C. |
| 3EA |
Energy Saving pattern 3E Asymmetric.(D4
distribution). |
For Electronic Ballast add "E"
to RS or CT. Ex: RSE or CTE. For a 3- or 4-lamp Electronic
Ballast add "X" to RSE or CTE.
Ex: XRSE or XCTE. For
complete listing, see Fixture Nomenclature in Technical Data section.
 |
PRUDENTIAL LIGHTING 1774 East 21st Street, Los
Angeles, CA 90058-0736 213.746.0360 FAX: 213.746.8838 |
|
