P-61
The P-61 Series is an aluminum, U.L.
listed, ceiling- or wall-mounted, one- or two-lamp wet location fixture. The wall mounted
fixture is available with a choice of three light distribution patterns: symmetrical (D1),
light directed away from wall (D4W). Various lengths, lamp types, and lens are available.
Door frame and lens sealed with gasketing and silicone.
P-61-D1
SURFACE (M1) or WALL MOUNT (M4) Symmetrical
The P-61 surface fixture (M1) can be mounted to
underside of a ceiling or canopy where it may be subjected to dampness or casual water. It
should not be subjected to high pressure water from a hose.
P-61-D4W-M4
WALL MOUNT Light directed toward wall. (Canopy field caulked by contractor.)
The P-61 wall mount (M1) is attached to a vertical
surface by means of water-resistant canopy and aluminum bracket, and may be mounted within
3 feet of the ground.
Wall mounted fixtures may be exposed directly
to weather.
P-61-D4R-M4
WALL MOUNT Light directed from wall. (Canopy field caulked by contractor.)
| FIXTURE W/LAMP ROWS |
DISTRIBUTION |
MOUNTING |
LAMP ROWS |
NOMINAL LENGTH (INCHES) |
RAPID (430 MA) ADD |
OCTIC T-8 (265 MA) ADD |
LENS |
| P-61 |
-D1 -D4W
-D4R |
-M1 (SURFACE) -M4 (WALL) |
-1 -2 |
-18 -24
-36
-48
-60
-72
-96 |
TS* RS
RSE
RSTW
RSETW |
BX* CT
CTE
CTTW
CTETW
XCTE
XCTETW |
-WA -PLC12
-PRA
-PTS12
PTSW |
*"TS" denotes Trigger Start.
"BX" denotes Biax.
SPECIFICATIONS
For low temperature (0) Rapid Start, specify suffix "-LT".
WA White Acrylic Diffuser
PLC12 Polycarbonate, pattern
12
PRA Prismatic Acrylic Lens
PTS12 High Impact Acrylic
Lens, pattern 12
PTSW High Impact Acrylic Lens,
White
For Electronic Ballast add "E"
to RS or CT.
Ex: RSE pr CTE.
For a 3- or 4-lamp Electronic Ballast add
"X" to CTE. Ex: XCTE.
For complete listing, see BALLAST DESIGNATION CHART in
"Mounting and Accessory" section.
Not suitable for hose-down.
 |
1774 E. 21st ST. LOS ANGELES, CA 90058
213.746.0360 Fax: 213.746.8838 |
|
