| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|


|
| |
|
| |
QC Construction Products QC Construction Products - Quality Architectural Concrete Release Powder - Page 20
| QC RELEASE
POWDER |
Product
Information Bulletin 4.199 |
PRODUCT DESCRIPTION
QC RELEASE POWDER is a dry blend of chemical powders and color pigments designed for use
in the imprinting process to allow the clean release of texturing tools from the concrete
surface. QC RELEASE POWDER also adds color variation to the textured surface, providing an
attractive two-color look that is part of most stamped concrete installations.
FEATURES &
BENEFITS
EXCELLENT RELEASE FOR TEXTURING TOOLS
COLOR VARIATION FOR TEXTURED CONCRETE SURFACES
DIRECTIONS FOR USE
QC RELEASE POWDER is hand broadcast evenly to the entire surface of freshly placed
concrete when the concrete reaches the proper set for imprinting. QC RELEASE POWDER should
remain in a dry state on the concrete surface and should not be worked into the surface.
Care should be taken not to trowel the release powder into the wet concrete.
| GENERAL
INFORMATION |
| Colors |
25 standard colors.
See QC COLOR HARDENER Color Chart.
Custom colors available upon request. |
| Suggested Sealers |
QC SOLVENT SEAL (see Product Information
Bulletin).
QC SOLVENT SEAL VOC II (see Product Information Bulletin).
QC CEMSEAL (see Product Information Bulletin).
QC HYDROSEAL (see Product Information Bulletin). |
| Maintenance |
It is highly recommended to develop and
follow a routine maintenance schedule for all colored concrete so that it will maintain a
top quality appearance. Every 18 to 36 months, colored concrete installations should be
inspected, cleaned and resealed as required by volume and intensity of traffic. The need
will depend on a number of factors including traffic conditions, geographical location and
weather. |
| Limitations |
Inconsistencies in job site conditions,
finishing practices and curing methods may produce variations in the color of the finished
product. QC RELEASE POWDER may be used on vertical faces of step risers, curbs, etc., but
is not practical for use on large areas of vertical surfaces. |
| Caution |
Use face mask or respirator. Do not allow to
get into eyes. Keep out of the reach of children. Prolonged breathing will cause throat
and lung irritation. See Material Safety Data Sheets for further information. |
| Shelf Life |
Indefinitely if protected from moisture. |
| COVERAGE
GUIDELINES |
| All colors |
1,050- 1,500 square feet per 30 pound pail
(97.5-139.4 square meters per 13.6 kilograms). Coverage rates vary with application
technique, wind conditions and texture of the concrete prior to application. |
| PACKAGING |
| Pail |
30 pounds/ 13.6 kilograms. |
Copyright © 19962008 AECinfo.com
|
|