QC Construction Products - Quality Architectural Concrete (QC Construction Products)

GENERAL INFORMATION
Colors	8 standard colors: Adobe, Blackfoot, Bluegrass, Buckwheat, Ember, Jade, Kodiak, Neptune.
Coverage Guidelines	200 - 400 square feet per gallon ( 18.6 - 37.2 sq. m per 3.8 L) per coat. Coverage will vary depending on finish and age of concrete.
Suggested Sealers	QC CEMSEAL (see Product Information Bulletin) QC SOLVENT SEAL (see Product Information Bulletin). QC SOLVENT SEAL VOC II (see Product Information Bulletin). QC CEMGUARD (see Product Information Bulletin).
Packaging	1, 5 & 55 gallon (3.8, 18.9 & 208.2 L) units. Allow one week for 55 gallon (208.2L) units.
Maintenance	It is highly recommended to develop and follow a routine maintenance schedule for all colored concrete so that it will maintain a top quality appearance. Maintenance sealers should be used on a periodic basis depending on traffic. The need will depend on a number of factors including traffic conditions, geographical location and weather. Patina Stain Floors should be routinely swept and damp mopped of dirt/loose debris to avoid unnecessary wear to the surface.
Limitations	Job site samples using the proposed QC PATINA STAINS, application procedures and sealing products should be done prior to application to better anticipate the results. For existing slabs, it is strongly recommended to sample the actual surface to be stained in an inconspicuous area. Inconsistencies in job site conditions, finishing practices, concrete mix design, slump, curing methods, stain application, age and condition of the concrete in existing slabs, base color and surface porosity may produce variations in the color of the finished product. In particular, blue and green based stains will react to the presence of moisture and will create black, spotty effect to the color. Photos in our brochure and sample color chips provide a good representation of our palette, but the actual colors achieved may differ significantly.
Shelf Life	Approximately one year. Keep at 40°F (5°C) minimum.
Cautions	Keep out of reach of children. For commercial use only. Do not take internally. See Material Safety Data Sheets for complete information.

QC PATINA STAIN is warranted to be of uniform quality within manufacturing tolerances. Since control is not exercised over ifs use, no warranty: express or implied, is made as to the effects of such use. Seller’s and manufacturer’s obligation under this warranty shall be limited to refunding the purchase price of that portion of the material proven to be defective. QC Construction Products^®, is a regestered trademark and servicemark with the U.S. patent office and other foreign countries. ©2000 QC Constuction Products, LLC

MADERA, CA

5M400

Patina Stains - Page 25