PRODUCT DESCRIPTION
QC FIBERS, 3/4, 1/2 or 1/4 inch (1.9, 1.3 or .6 cm) monofilament virgin polypropylene fibers, are used as a multi-directional secondary reinforcement in concrete and are designed to inhibit plastic shrinkage cracking in slabs on grade construction.

FEATURES & BENEFITS
EXTREMELY EASY AND COST-EFFECTIVE TO USE
REDUCES UNSIGHTLY CRACKS CAUSED BY PLASTIC SHRINKAGE
INCREASES IMPACT AND ABRASION RESISTANCE
REDUCES PERMEABILITY TO MOISTURE AND CHLORIDES
RESISTANT TO ALKALI
WILL NOT RUST OR DETERIORATE LIKE WELDED WIRE MESH
NON-ABSORBENT AND WILL NOT AFFECT ADMIXTURES

DIRECTIONS FOR USE
Use approximately 1.5 pounds (.7 kg) of QC FIBERS for each cubic yard of concrete (.8 cubic m). QC FIBERS can be added at the ready mixed plant or to the mixer truck at the job site. Simply throw the entire bag of QC FIBERS into the center of the mixer and mix for 5 - 8 minutes at 3/4 speed. Overmixing will have no negative effects. Concrete finishers will find it very easy to work with QC FIBERS. The 3/4, 1/2 or 1/4 inch (1.9, 1.3 or .6 cm), low denier design greatly reduces surface bristles and is recommended for architectural concrete as well as conventional slabs.

QC FIBERS are warranted to be of uniform qualify within manufacturing tolerances. Since control is not exercised over ifs use, no warranty expressed or implied, is made as to the effects of such use. Seller’s and manufacturer’s obligation under this warranty shall be limited to refunding the purchase price of that portion of the material proven to be defective. QC Construction Products, is a regestered trademark and servicemark with the U.S. patent office and other foreign countries. QC Construction Products^®, is a regestered trademark and servicemark with the U.S. patent office and other foreign countries. ©2000 QC Constuction Products, LLC

April 2000

For ordering
information call
800-453-8213                

MADERA, CA

www.qcconprod.com

5M400