SELECTOR GUIDE |
 |
ANCHOR
CHARACTERISTICS |
SPECIFICATIONS |
PRODUCT
VARIATIONS |
OFFICIAL
APPROVALS |
TRUBOLT
WEDGE |
Externally threaded, hole
size/bolt size anchor with one piece, stainless steel expansion clip. X-long threads. |
 Size Range 1/4" thru 1-1/4" Overall Lengths
1-3/4" thru 12"
Material Thickness up to 8" |
Plated Carbon Steel Hot-Dip Galvanized Carbon
Steel
302HQ/303
Stainless Steel
316
Stainless Steel
Tie
Wire |
ICBO
SBCCI
COLA
UL
FM
MDC
CSFM |
|
DYNABOLT
SLEEVE |
Externally threaded, hole
size/anchor size anchor for use in concrete, hollow block & grout-filled block. |
Size Range 1/4" thru 3/4" Overall Lengths
5/8" thru 6-1/4"
Material
Thickness up to 4-1/2" |
Hex*, Flat*, Round*, Acorn Nut, Tie Wire, Threshold Flat Heads, Hex Coupling
*Stainless Steel Also Available |
ICBO
SBCCI
COLA
FM
MDC
CSFM |
|
MULTI-SET II
DROP-IN |
Internally threaded,
flange-topped drop-in anchor w/pre-assembled expander plug. |
Bolt sizes 1/4" thru 3/4" Overall Lengths
1" thru 3-3/16"
Thread
Depths 3/8" to 1-1/4" |
Plated Carbon Steel 303 Stainless Steel |
ICBO
SBCCI
COLA
UL
FM
MDC
CSFM |
|
| SELF-DRILL |
Internally threaded,
self-drilling anchor. Drills its own hole. |
Bolt sizes 1/4" thru 3/4" Installed
Lengths 1-3/32" thru 3-1/4"
Thread
Depths 3/8" to 1-7/32" |
Plated Carbon Steel Threaded for Galvanized
Bolts (Special order) |
ICBO
SBCCI
COLA
UL
FM
MDC
CSFM |
|
| STUD ANCHOR |
Externally threaded, hole
size/bolt size bottom-bearing anchor. |
Size Ranch 1/4" thru 3/4" Overall Lengths
1-3/4" thru 8-1/2"
Stud
Lengths 3/4" to 6" |
Plated Carbon Steel |
ICBO
SBCCI
COLA
UL
FM
MDC
CSFM |
|
| NON-DRILL |
Internally threaded,
bottom-bearing drop-in anchor. |
Bolt sizes 1/4" thru 3/4" Overall Lengths
1-1/8" thru 3-3/16"
Thread
Depths 3/8" to 1-1/8" |
Plated Carbon Steel |
ICBO
SBCCI
COLA
UL
FM
MDC
CSFM |
|
| SHURE-SET |
Hammer drive pin, no
pre-drilling. |
Diameter .140" Size Range 5/8" thru 2"
Material
Thickness 1/8" to 1-1/4" |
Plated Carbon Steel |
- |
|
| E-Z ANCOR |
Self-drilling one-piece anchor
for mounting to wallboard. |
Accepts a #8 screw Wallboard Thicknesses up to
5/8" |
Die-Cast Zinc |
- |
|
| POLY-SET |
Multi-base material anchor,
plastic bodied. |
3/16" Drill Size for #6 and #8 screw 9/32" Drill Size for #10 and #12
screw |
Plastic |
- |
|
| POLY-TIE |
One piece molded plastic cable
strap for use in multi-base materials. |
Hole Diameter 5/16" Strap Diameter Capacity 1/4" thru
1"
UV
Resistant |
Plastic, UV Resistant |
- |
|
| POLY-DRIVE |
One piece, flat
countersunk head with removable pin for use in multi-base materials. |
Diameter 3/16", 1/4", 5/16"
Size
Range 1-3/8" to 2-7/8"
Material
Thickness 1/4" to 1-1/4" |
Plastic with Zinc Plated Pin |
- |
|
| HAMMER-LOC |
One-piece, carbon steel hammer
drive. |
Diameter 3/16" and 1/4" Size Range 1-1/2" to 6"
Material
Thickness 1/8" to 4-1/2" |
Plated Carbon Steel |
- |
|
| HAMMER-SET |
Hammer driven anchor for use in
multi-base materials. |
Diameter 3/16" thru 1/4" Size Range
7/8" to 2"
Material
Thickness 1/4" to 1-1/4" |
Die Cast Zinc with Plated Steel Nail |
- |
|
| TAPCON |
Externally threaded,
self-tapping, concrete anchor. |
Size Range 3/16" & 1/4" Overall Lengths
1-1/4" thru 4"
Material
Thickness up to 3" |
Slotted Hex Washer Head Phillips Flat Head |
ICBO
MDC |
