| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|
|
| |
|
| |
  ITW Ramset / Red Head Concrete Anchor Systems Concrete Anchor Systems - Page 2
 |
|
|
EPCON SYSTEM |
MADE IN U.S.A. |
| CERAMIC 6
EPOXY
READY-TO-USE, CERAMIC-FILLED EPOXY FORMULATED FOR HIGH-STRENGTH ANCHORING IN SOLID
CONCRETE AND HOLLOW MASONRY
- CONSISTENT PERFORMANCE The static mixer nozzle folds the
hardener and resin together 262,000 times. The patented metering system provides a proper
1:1 ratio mix.
- 3 YEAR SHELF LIFE No product deterioration, components remain
stable and separate until they enter the nozzle.
- TREMENDOUS HOLDING POWER No breakdown of bond over time;
holding strength actually increases with time.
- MINIMAL SHRINKAGE allows for variations in hole diameter.
- MINIMUM DEFLECTION UNDER LOAD
- SAFE contains no styrenes or chemical solvents.
- 200°F FLASH POINT Ceramic 6 epoxy is not a fire
hazard.
- EXCELLENT DYNAMIC PERFORMANCE Epcon system
anchors have excellent vibration resistance.
- FAST INSTALLATION In as little as seven minutes
Ceramic 6 Epoxy sets up, an anchors can be loaded in an hour at room temperature.
|
INSTALLATION TOOLS |
|
|
- Compact lightweight steel tool.
- Adjustable trigger handle to increase/decrease pressure.
- Instant pressure release lever to stop waste.
- Fast loading easy to operate.
|
|
|
- Powered by air compressors (minimum 60 P.S.I. needed).
- Dispensing trigger for fast and even flow.
- Relief button stops dripping and waste.
- Unique automatic blow-out system for cleaning drilled holes.
|
|
|
- Same as E200 plus dosage control feature. Same amount of Ceramic 6
Epoxy in every hole with one push of the button.
|
|
|
- Great for small jobs and hard to get to locations.
- Easy to assemble and operate.
- Uses same Ceramic 6 Epoxy.
|
|
Copyright © 1996–2009 AECinfo.com
|
|
