architecture - engineering - construction
Raynor Garage Doors
Rolling Doors & Electric Operators
Rolling Doors & Electric Operators Page - 1
Rolling Doors & Electric Operators
 Slat Design Selection
Clearance Chart and Details Selection
Determine slat type and gauge to be used in service
door according to the slat selection guide shown. (Details provided represent Raynor
standard design.) Contact Raynor Engineering for specific clearance information on high
cycle doors, special slat gauges, etc.
Choose the area from the Standard Clearance Charts
which correspond to the desired slat type and door size.
The number designation can then be used to pick
specific clearance information from the Clearance Details.
When door size falls on line, select area above.
When door size falls on or above dotted line, contact
factory for sideroom clearances.
Slat Selection Guide
Slat |
Materials |
Gauge |
Max. Opening
Width |
Windlocks |
SC |
Steel |
22 |
12'4" (3759mm) |
None |
SC |
Steel |
20 |
14' (4267mm) |
None |
LC |
Steel |
22 |
15' (4572mm) |
None |
LC |
Steel |
20 |
18' (5486mm) |
None |
LC |
Steel |
20 |
21' (6401mm) |
Every 6th Slat |
LC |
Steel |
18 |
30' (9144mm) |
Every 6th Slat |
FF |
Steel |
24 |
Contact Factory |
Contact Factory |
FF |
Steel/Stainless Steel |
22 |
14' (4267mm) |
None |
FF |
Steel/Stainless Steel |
20 |
16' (4877mm) |
None |
FF |
Steel/Stainless Steel |
20 |
21' (6401mm) |
Every 6th Slat |
FF |
Steel |
18 |
30' (9144mm) |
Every 6th Slat |
IF |
Steel |
22 |
16' (4877mm) |
None |
IF |
Steel |
20 |
18' (5486mm) |
None |
IF |
Steel |
20 |
25' (7620mm) |
Every 6th Slat |
IF |
Steel |
18 |
30' (9144mm) |
Every 6th Slat |
FP* |
Steel |
22 |
14' (4267mm) |
None |
FP* |
Steel |
20 |
21' (7315mm) |
Every 6th Slat |
AF/AP* |
Aluminum |
.04 |
10' (3048mm) |
None |
AF* |
Aluminum |
.04 |
14' (4267mm) |
Every 6th Slat |
AF/AP* |
Aluminum |
.05 |
24' (7315mm) |
Every 6th Slat |
AI |
Aluminum |
.04/.05 |
14' (4267mm) |
Every 6th Slat |
* Maximum height is 16' (4877mm) |
