Product Features

• Curtain slats consist of interlocking flat slat roll-formed from not less than 24 gauge commercial quality hot-dipped galvanized (minimum G-60) steel in accordance with ASTM A-924 and ASTM A-653 and pre-coated with a two coat baked-on finish.

• The bottom of the curtain is reinforced with an extruded aluminum bottom bar which holds a factory installed single contact astragal.

• Hot-dipped galvanized guide assemblies are manufactured from 16 gauge roll-formed channels fastened to a 2 1/2" (63.5mm) x 2 1/2" (63.5mm) x 11 gauge minimum roll-formed wall mounting bracket.

• Bracket plates for mounting curtain and counterbalance assembly are made from minimum 10 gauge hot-dipped galvanized steel.

• All Raynor rolling service doors are identified by individual serial numbers kept permanently on file to provide accurate parts replacement at any time.