A 3" DEEP STRUCTURAL RAFTER SYSTEM
The SOLARIUM 2300 and 2400 commercial skylight framing
systems, with their 3" and 4" deep rafters, respectively, are state of the art
products. Both I-Beam Rafters, for economy, and Tubular Rafters, for the
cleanest possible sight lines and greater strength, are available. They feature numerous
purlin, mounting and glazing cap options and can be tape, dry, or structural silicone
glazed. Many options are shown on pages 5, 6, 7 and 11.
These products offer our unique ball and socket tilt
mount system. On most installations, this mounting method eliminates the need for sloped
curb construction or special supports at the sill. The tilting main frames can rotate up
to 125 degrees to accommodate any angle of slope (see page 11). The SOLARIUM 2300 and 2400 systems are also
available with the older, inclined curb (ledger) mounting methods commonly used in the
commercial skylight industry. Nearly any anodized or painted finish is available.
Multiple cascade condensation gutters surrounding each
light are standard and cause any condensate to drop when transitioning from one member to
the next on its path to the exterior. The condensate exists through our advanced hooded
weep holes.
Their extreme versatility, combined with their many
quality features of design, sturdy, weathertight construction and rapid installation and
glazing make the SOLARVIEW 2300 and 2400 systems excellent choices for nearly any project.
SCALE: 3"-1' (.25 = 1)
Detail identification
letters refer to page 2.
|
