Escalator Systems (Schindler Elevator Corp.)

Schindler 9300™	Type 10/ 30-M
Rise:	max.7.5 m at a step width of 1000mm	Balustrade: Balustrade height: Truss:	Design E/F 900 (1000) mm Standard	Inclination: Step width: Step run:	30° 600/800/1000 mm 3 horizontal steps

zsch130a.gif (17265 bytes)

zsch130b.gif (16927 bytes)

1) If L>Lmax., an intermediate support may be required; please consult your local Schindler office.

2) In case of a double drive, the truss must be extended by 417 mm.

3) h' = h - 770 mm

4) Motor Size : For detailed information , consult your local Schindler office

5) In case of balustrade height 900mm, h is reduced by 70 mm.

6) Based on this step run, without truss extension.

7) Add 203 mm to pit depth if oil separator is required.

All dimensions are in mm. Observe national regulations! Subject to change.

Type 9300-10-30-	Rise H mm	Weight kN	Support loads		Motor⁴⁾ Size kW v=0,5 m/s	Transport dimensions Balustrade height 1000
	Rise H mm	Weight kN	R1 kN	R2 kN	Motor⁴⁾ Size kW v=0,5 m/s	h⁵⁾	I
60M	3000	62	51	43	5,5	2940	11610
60M	3500	66	54	46	5,5	2980	12590
0.45 m/s 4050 p/h 0.5 m/s 4500 p/h	4000	70	57	50	5,5	3010	13580
	4500	73	60	53	5,5	3030	14570
	5000	77	64	56	5,5	3050	15570
	5500	80	67	59	5,5	3060	16560
	6000	84	70	62	7,5	3080	17550

80M 0.45 m/s 6075 p/h 0.5 m/s 6750 p/h	3000	66	58	50	5,5	2940	11610
	3500	69	62	54	5,5	2980	12590
	4000	73	65	58	5,5	3010	13580
	4500	77	69	61	5,5	3030	14570
	5000	81	73	65	7,5	3050	15570
	5500	89	78	71	7,5	3060	16560
	6000	93	82	74	7,5	3080	17550

100M 0.45 m/s 8100 p/h 0.5 m/s 9000 p/h	3000	70	66	58	5,5	2940	11610
	3500	74	70	62	5,5	2980	12590
	4000	78	74	66	7,5	3010	13580
	4500	86	80	72	7,5	3030	14570
	5000	90	84	76	7,5	3050	15570
	5500	94	89	81	11,0	3060	16560
	6000	99	93	85	11,0	3080	17550

Escalator Systems - Page 13