Escalator Systems (Schindler Elevator Corp.)

Schindler 9300™			Type 10 /30-K
Rise:	max.7.5m at a step width of 1000 mm	Balustrade: Balustrade height : Truss:	Design E/F 900(1000)mm Standard	Inclination: Step width: step run:	30º 600/800/1000 mm 2 horizontal steps

zsch132a.gif (17632 bytes)

zsch132b.gif (17501 bytes)

1) if L>Lmax.,an intermediate support may be required;please consult your local schindler office.

2) In the case of a double drive,the truss must be extended by 417mm

3) h' = h - 770 mm

4) Motor Size: for detailed information,consult your local Schindler office.

5) In the case of balustrade height 900 mm,h is reduced by 70 mm.

6) Based on this step run,without truss extension.

7) Add 203 mm to pit depth if oil seperator is required.

Type 9300-10-30-	Rise H mm	Weight kN	Support loads		Motor Size kW v=0.5m/s	Transport dimensions Balustrade height 1000
Type 9300-10-30-	Rise H mm	Weight kN	R1 kN	R2 kN	Motor Size kW v=0.5m/s	h⁵⁾	I
60K 0.45 m/s 4050 p/h 0.5 m/s 4500 p/h	3000	59	48	40	5,5	2830	10860
	3500	62	51	43	5,5	2860	11850
	4000	66	54	47	5,5	2880	12840
	4500	69	57	50	5,5	2890	13840
	5000	73	61	53	5,5	2910	14830
	5500	77	64	56	5,5	2920	15830
	6000	80	67	59	7,5	2930	16820

All dimensions are in mm. Observe national egulations! Subject to change.

Escalator Systems - Page 15