architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Shaper Lighting   Wall Mounted Exterior  

Wall Mounted Exterior - 641-WP / 651-WP / 687-WP

   

Wall Mounted Exterior


687-WP
641-WP
651-WP
687-WP
Weatherproof Uplights
 
A choice of geometric shapes to provide accent uplight.
Choice of incandescent, fluorescent or HID lamping.
Available in a variety of long lasting finishes.
All install simply to a J-box, with no "backbox" required.
641-WP 651-WP

 

641-WP, 651-WP & 687-WP
transparent_dot.gif (43 bytes)

WEATHERPROOF UPLIGHTS
transparent_dot.gif (43 bytes)
transparent_dot.gif (43 bytes)
LAMPS / BALLASTS
Incandescent: 1 - 150W max (A-21).
Fluorescent: 1 or 2 compact 26W (F26DTT), electronic ballast standard.
H.I.D.: 1- 70 or 100W max metal halide, or high pressure sodium. (electronic ballast is standard for metal halide.)
transparent_dot.gif (43 bytes) transparent_dot.gif (43 bytes)
Specify voltage. Incandescent available 120V only.
See "Ballasts" and "Lamps" in Section G. Lamps not included. See "User Guide" for information on starting temperatures of fluorescent fixtures.
transparent_dot.gif (43 bytes)
MATERIALS / FIXTURE LOCATION
U.L. listed for wet locations. Aluminum base metal is used for painted finishes. Bronze is used for Natural Bronze and Verdi-Gris finishes. (Natural finish will weather to a dark bronze patina.) Internal uplight unit is cast aluminum.
Note: See Spec. Nos. 641, 651 and 687 in Section C for interior use.
transparent_dot.gif (43 bytes)
FINISHES
NBZ   –    Natural Finish Solid Bronze (weathers to a dark bronze patina.)
SGB   --   Semi-Gloss Black
SGW –    Semi-Gloss White
CC   –     Custom Color, Semi-Gloss
VG   –     Verdi-Gris
SZ   –      Satin Zinc

MOUNTING
Standard - 4° J–Box or stucco ring. For rear conduit mounting specify suffix C.
OPTIONS
transparent_dot.gif (43 bytes)

For downlight versions for wet locations See Spec. Nos. 694-WP, 695-WP and 682 in catalog Section D.

 For interior versions, See Spec. Nos. 641, 651, and 687 in catalog Section C.
NOTES
transparent_dot.gif (43 bytes)
• Although these fixtures are suitable for use in damp locations, the interior versions shown to the left are available for damp locations at a cost savings over the WP versions shown here.
• For surface mount conduit power feed, call factory.

• For additional solid metal finishes call factory.
SPEC GUIDE
transparent_dot.gif (43 bytes)
c /IBEW LABELLED
transparent_dot.gif (43 bytes)

PDF Files: Catalog Page - Technical Specifications


Copyright© 1999		 1141 Marina Way South, Richmond, CA 94804-3742
(510) 234-2370  Fax (510) 234-2371



Request for Information / Request a Catalog from Shaper Lighting
 
 
 
To request more information from Shaper Lighting, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.