Wall Mounted Interior (Shaper Lighting)

662
Luminous Shield

	Timeless design in a luminous ADA sconce.
	Standard sandblasted white acrylic.
	Optional glass or "glass green" acrylic.
	Available with perforated shield. Design: Bruce Thompson

(SHOWN WITH OPTIONAL PERFORATED SHIELD)
ORACLE
REDWOOD CITY, CA
INT. DES: SECCOMBE DESIGN
LTG. DESIGN: LIGHTING INTEGRATION TECHNOLOGY

M662
ADOBE
SAN JOSE, CA
INT. DES: SECCOMBE DESIGN
LTG DESIGN: LIGHTING BY DESIGN

662

LUMINOUS SHIELD

LAMPS / BALLASTS

Incandescent:

2 - 60W max (T-10/frosted).

Fluorescent:

2 compact 13W (F13TT), or 2 compact 26W (F26DTT), electronic ballast only.

Specify voltage. Incandescent available 120V only.
Standard ballasts are High Power Factor (HPF) class "P" thermally protected. Electronic ballasts (SSB) are available (4-pin lamp required). See "Ballasts" and "Lamps" in Section G. Lamps not included.

MATERIALS / FIXTURE LOCATION

Interior & Exterior Use: Backplate is aluminum painted white. Trim bars are die-cast aluminum for painted and plated finishes. Not available for wet locations. Brass finishes not available for exterior use. Perforated metal and solid metal options are steel or aluminum depending on finish and location.

FINISHES
Shield: White Acrylic with sanded finish. Hand-painted Faux Alabaster optional.
Backplate: Matte White.
Trim & Perforated Metal Option: (Spec'd separately, see Spec. Guide below).
MW– Matte White
CC – Custom Color
PC – Polished Chrome
SC – Satin Chrome
PB – Polished Brass
SB – Satin Brass
SAL–Satin Aluminum (Lacquered)

MOUNTING
Standard - 4º J-Box or plaster ring.

OPTIONS


Slumped ¼" thick plate glass shield, sanded both sides, specify suffix GL or ¼" "Glass-Green" Acrylic, sanded, specify suffix GG.	Perforated metal top & bottom covers, specify suffix TBC.	Perforated metal shield: ¼" Sq. holes, 3/8," o.c. with 1¼" margin, White Acrylic liner, specify suffix PM with separate finish.

NOTES

• For other perforated metal patterns, call factory.
• For solid metal shield, call factory.
• For special sizes, call Rep or factory.
• For photometric data, see Section H.

SPEC GUIDE

FOUNDATION FOR DESIGN INTEGRITY
c

/IBEW LABELLED

PDF Files: Catalog Page - Technical Specifications - Installation Instruction - Photometrics | Zip File: IES Files

1141 Marina Way South, Richmond, CA 94804-3742
(510) 234-2370 Fax (510) 234-2371

Wall Mounted Interior - 662