|
SPRAY APPLIED GRANITE
Product Data Sheet 4/98
Uses:
Interior and exterior surfaces, especially where granite
aesthetics are required. Can be applied over any solid
surface including concrete EIFS, wood, plywood, masonry,
glass and stone.
Components:
Base coat primer: Acrylic, available in white, gray or black.
Forms bond to surface
Main coat: Acrylic, contains 65 to 70% quarried granite.
Three textures and 39 colors
Top coat: Acrylic, provides final finish and UV protection.
Available in gloss, semi-gloss and matte.
Application:
Base coat: Spray, roll or brush.
Main Coat: Aggregate sprayer or trowel.
Top coat: Spray, roll or brush, spray recommended for
consistency.
Apply on dry surfaces when temperature will be above
55-degrees for at least two hours. Protect from rain for 24
hours.
Main Coat
Texture |
Thickness |
Weight lbs. per
s.f. |
Colors
Available |
Fine (SI) |
.04 -.06 inch |
.67 |
24 |
Medium (SE) |
.06 -. 12 inch |
.80 |
12 |
Coarse (SB) |
.12 - varies inch |
.94 |
3 |
Warranty: Five Year Factory Warranty
Testing:
Flame spread - ASTM E84 Surface Burning Flame Spread;
FSI 22.6 (Class I) Smoke Develop SDI 41
Storage:
Avoid freezing or excessive heat. Use within 12 months.
Clean Up:
Clean up with water.
73 LEIGH AVENUE
CAMPBELL, CA 95008
VOICE / FAX SUPPORT LINE
408-371-6534
SUPPORT@STONECOAT.COM
WWW.STONECOAT.COM
|
