INTRODUCING THE SUB-ZERO 600 SERIES

One most important step in assuring a successful plan is to make sure that the actual equipment shipped to your installation site matches the design you have ordered. To insure the best possible customer service, make sure your installer checks the shipment carefully at the job site.

Each of these three design options – Stainless Steel, Framed and Overlay – has specific installation requirements, which means it is vital that the unit match your planning and space needs. Each different design alternative will be shipped in a different carton.

• Stainless steel units are packed in cartons with a gray cap and white lettering identifying them as stainless. The stainless steel unit has a wrapped door, one-inch diameter handles and heavy-duty stainless steel louvered grille.
• Framed units are packed in cartons with a white cap and blue lettering identifying them as framed. The framed unit will have an extruded handle and louvered grille.
• Overlay units are packed in cartons with a blue cap and white lettering identifying them as overlay. Units are shipped with no handle hardware (hardware is supplied at the site to match cabinetry at the installation) and a two-part panel grille frame without a panel.

At the rear of this design guide you’ll find a list of tips for installing Sub-Zero units. These tips are intended as a brief summary of the most important procedures involved in installation. However, they do not constitute detailed installation instructions. Comprehensive installation instructions are shipped with each unit. Refer to those instructions in preparing and installing all Sub-Zero products, or call Sub-Zero Freezer Company at 800-222-7820 for your copy.

The 600 Series

For information regarding specific 600 Series models, refer to the charts and illustrations in this section. Regardless of the specific design application, all interior specifications are identical.