| Search |
|
|
|
| |
| Site Navigation |
|
|
|
| News / Publications |
|
|
|
| Jobs | |
|
|
| Service |
|
|
|
|
|


|
| |
|
| |
Sub-Zero Design Guide Design Guide - Page 18

|
700 SERIES
SPECIFICATIONS
AND FEATURES |
Features and Options
Sub-Zeros industry leadership is evident in this new approach to residential refrigeration. Our tradition of excellence is evident in all
of these features and options.
Functional Design. These units can be placed anywhere in the home.
Think about "point-of-use refrigeration" when planning where to place your units. Kitchens can be laid out
so no congestion occurs.
Built-in Design. All Sub-Zero units are 24" deep. These 700
Series units must have 5/8-inch minimum panels that do not exceed a 40 pound weight limit
for the door or 12 pounds for the
drawer. They will be compatible with virtually any cabinetry and be invisible when installed properly.
Microprocessor. The
"brains" of the 700 Series units, this computer allows the best in temperature
control, efficiency and food
preservation.
Temperature Zones. On the tall and base refrigerator and combination
units, you have the flexibility of having multiple temperatures within the same unit.
Adaptive Defrost. Depending on the usage and the exact climate, the
700 Series unit will adapt to the unique situation and adjust accordingly to offer greater efficiency.
Toe Plate. Adjustable solid toe plate meets the standards of
the American Institute of Architects. Inset area for a solid, decorative toe plate is 4-inch high by 3-inch deep. You can show a
10-inch toe plate, but you cannot cover the louvers in this area. If you choose,
the louvered grille can be painted.
Front Venting. All units have the mechanical equipment in an area
below the lower drawer. The lower drawer panel can extend to cover these louvers, but a decorative toe plate cannot
cover the fins. A decorative toe plate can be placed over the lower 4-inch area, but it must be removable for
cleaning and service.
Halogen Lighting. A bright, white light offers even illumination throughout the entire unit.
Door/Drawer Alarm. If your door or drawer is accidentally left open for
more than 15 seconds an audible alarm
will sound. You can easily disarm this feature when you are cleaning the unit or adding
groceries.
Drip-Proof Shelves. All shelves in the cabinet sections of the tall
units feature totally adjustable drip-proof one-piece glass shelves that are easily removed for cleaning or
repositioning.
Dairy Shelf. This magnetically
sealed compartment is fully adjustable on the tall refrigerator and combination unit for small items that need a fresh
environment.
Crisper Cover. On the tall and base refrigerator units, a removable
crisper cover is offered for one of the drawer sections. On the combination unit, the crisper is attached to one of the
adjustable shelf assemblies.
Deli-Drawer. Smaller items are not lost in this handy feature of the tall refrigerator unit.
Egg Tray. You can easily store
a dozen eggs on this removable egg tray that is offered on the tall refrigerator and combination units.
Ice Maker. An automatic ice maker, providing crescent-shaped
ice, is available as an option on the tall and base freezers as well as the tall combination unit. This optional equipment must
be factory installed.
Automatic Defrost. All Sub-Zero 700 Series units have an automatic defrost system.
Door Swing. You can choose left or right door swing on the tall
units. This option must be ordered when requesting the unit. You cannot reverse the door in the field.
Door Stop. On all of the tall units, a 90 degree door stop is
built in to the patented hinge of this unique product. Normal door swing is 105 degrees.
Temperature Zones. With the microprocessor in the 700 Series units, you
have the capability of setting temperatures to ensure food is stored at its optimum level.
Different foods enjoy different
temperatures and humidity levels, and with the 700 Series food storage system, you have
the ability to set different temperatures. The micro-processor will read the temperature in each zone every second and make
any necessary adjustments.
Temperature zones and optimum
ranges for all units:
700TRThree
Zones 34 to 45 degrees.
700BRTwo Zones 34
to 45 degrees.
700TF(I)One
Zone minus five to plus five degrees.
700BF(I)One
Zone minus five to plus five degrees.
700TC(I)Two
Zones Cabinet 34 to 45 degrees;
Drawers minus five to plus five degrees. |

|

|
Copyright © 19962008 AECinfo.com
|
|