architecture - engineering - construction
AECinfo.com
Printable version Bookmark this page Notify a colleague or friend about this page Bookmark and Share
  Sub-Zero   Design Guide  

Design Guide - Page 22

   

Design Guide

subzd15a.gif (974 bytes)

700 SERIES
PLANNING INFORMATION

 

subzd22a.gif (8573 bytes)

subzd22b.gif (6482 bytes)

subzd22c.gif (9959 bytes)

subzd22d.gif (6941 bytes)

subzd22e.gif (6748 bytes)

subzd22f.gif (5199 bytes)

subzd22g.gif (5769 bytes)

 

Framed Applications

Framed cabinet applications present you with different to address. Take the time to review the specifics of these illustrations as they will help form the basis for your design.

These are not meant to be the only alternatives, but are suggestions from designers around the country.

Reveals between cabinets and the Sub-Zero 700 Series units are 1/4-inch in all instances and drawer and door panels can vary based on information we supplied on earlier pages.

Study these illustrations in detail. Rest assured the Sub-Zero units are compatible with framed cabinet installations.

CAUTION

As the reveal between cabinets and the 700 Series unit decreases, the potential exists for severe finger pinching or crushing if a hand or fingers are placed in the opening when the door is closing.

 


subzd01a.jpg (7594 bytes)

 

subzd1b.gif (4326 bytes)

 



Request for Information / Request a Catalog from Sub-Zero
 
 
 
To request more information from Sub-Zero, please complete the form below.
 
*Name:    
*Email:    
Company:    
*Type:    
Phone:    
*Address:    
*Request:    
    (* = Mandatory field) 
Please add me to the mailing list for the free monthly e-Newsletter AECnews.