architecture - engineering - construction
Taymor Industries, Inc.
Grab Bars
Taymor Grab Bars - Page 4
Grab Bars
|
HEAVY DUTY
 GRAB BARS
 
|
SPECIFICATIONS
- TUBING IS FABRICATED OF 18 GAUGE (.050"), TYPE 304
STAINLESS STEEL.
- EXPOSED SURFACES POLISHED TO A NO. 4 SATIN FINISH.
- CONCEALED FLANGES ARE 11 GAUGE (1/8"), TYPE 304
STAINLESS STEEL, 3" IN DIAMETER. 22 GAUGE (1/32"), TYPE 304 STAINLESS STEEL SNAP
FLANGE COVER PLATE ESCUTCHEON.
- MOUNTING PLATES AND CENTER POSTS ARE HELIARC WELDED TO
TUBING.
- TUBING IS FABRICATED OF 18 GAUGE (.050), TYPE 304 STAINLESS
STEEL.
- EXPOSED SURFACES POLISHED TO A NO. 4 SATIN FINISH.
- EXPOSED FLANGES ARE 11 GAUGE (1/8"), TYPE 304 STAINLESS
STEEL, 3" IN DIAMETER WITH 2 MOUNTING HOLES.
- FLANGES AND CENTER POSTS ARE HELIARC WELDED TO TUBING.
- ALL BARS ARE FURNISHED WITH 1-1/2" CLEARANCE UNLESS
OTHERWISE SPECIFIED.
- CLEARANCE IS THE DISTANCE BETWEEN THE FINISHED WALL SURFACE
AND THE INNER EDGE OF THE TUBING. THE STANDARD CLEARANCE FURNISHED IS 1-1/2" (AS
SHOWN). OTHER CLEARANCES ARE AVAILABLE UPON REQUEST.
- CUSTOM MADE CRAB BARS ARE AVAILABLE UPON REQUEST.
- MEETS ADA REQUIREMENTS.
| TAYMOR GRAB BARS WHEN PROPERLY INSTALLED. EXCEED HUD. HEW. FHA. VA AND OTHER
FEDERAL. STATE AND LOCAL CODES. |
|
TAYMOR INDUSTRIES INC. • MAY 1997 |
