 |
 |
01-11249, 01-112416, 01-112424, 01-112432, 01-112436,
05-PB112416, 05-PB112424 GRAB BAR
- surface mount, exposed screw mount application
POSTS
- with 3 mounting holes
- includes #8 x 2" (50.8mm) installation screws and
internal alien screw to prevent grab bar from spinning
- construction: Chrome finish (01-R1024P)
- Zamac (die-cast zinc alloy) process:-polished, copper
plated, nickel plated and then chrome plated
Polished Brass finish (05-RPB1024P)
- Zamac (die-cast zinc alloy) process:-polished, copper
plated, nickel plated, bright brass plated and then epoxy clear coated BARS
- 7/8" (22.23mm) round outer diameter
- available in 9", (228.6mm)-chrome only, 16"
(406.4mm), 24" (609.6mm), 32"-chrome only (812.88mm) and 36"-chrome
only(914.4mm) lengths
- 1-1/2" (38.1mm) wall clearance
- construction: Chrome finish (01 -R11249, 01-RI 12416,
01-R112424, 01-RI 12432, 01 -R1 12436) - 0.035" (0.89mm) - 20 gauge wall thickness.
Type 304 polished Stainless Steel, extruded, clean cut ends
Polished Brass finish (05-RPB12416, 05-RPB12424) -
0.035" (0.89mm) - 19 gauge wall thickness, solid brass, extruded, clean cut ends
STANDARDS
- safety engineered to withstand up to 300 Ibs. (136 kg)
downward pull during normal conditions, when properly installed |
 |
 |
01-1128 ANGLE GRAB BAR
- surface mount, exposed screw mount application
POSTS (01-R1026P)
- with 3 mounting holes
- two end posts and one center post
- includes #8 x 2" (50.8mm) installation screws and
internal alien screw to prevent grab bar from spinning
- constructed of Zamac (die-cast zinc alloy)
process:-polished, copper plated, nickel plated and then chrome plated
BAR (01-R1026)
- 7/8" (22.23mm) round outer diameter
- available in 16" x 32" (406.4mm x 812.8mm)
length
- 1-1/2" (38.1mm) wall clearance
- constructed of 0.027" (0.686mm) - 22 gauge wall
thickness. Type 304 polished Stainless Steel, extruded, clean cut ends
STANDARDS
- safety engineered to withstand up to 300 Ibs. (136 kg)
downward pull during normal conditions, when properly installed |
