Taymor Grab Bars - Page 29

HEAVY-DUTY STAINLESS STEEL GRAB BARS (cont'd.)

Concealed Grab Bars

MEETS ADA REQUIREMENTS

CONCEALED 1-1/4" GRAB BAR

- surface mount, concealed screw mount application - includes #10 x 2" (50.8mm) stainless steel installation screws - constructed of satin finish Type 304 Stainless Steel

FLANGE

- heliarc welded to bar - 3" (76.2mm) diameter with 3 mounting holes - 0.078" (1.98mm) - 14 qauqe wall thickness

- snap on cover application - 0.036" (0.91mm) -20 gauge wall thickness

BAR

- 1-1/4" (31.75mm) round outer diameter

- 1 1/2" (38.1mm) wall clearance

- available in 10" (254mm), 12" (304.8mm), 16" (406.4mm), 18" (457.2mm), 24" (609.6mm), 30" (762mm), 32" (812.88mm), 36" (914.4mm), 42" (1066.8mm) and 48" (1219.2mm) lengths -constructed of 0.049" (1.25mm) - 18 gauge wall thickness

STANDARDS

- exceeds HUD, HEW, FHA and other Federal and local codes during normal conditions, when properly installed. Withstands 300 Ibs of pressure.

CONCEALED 1-1/2" GRAB BAR

- surface mount, concealed screw mount application - includes #10 x 2" (50.8mm) stainless steel installation screws

- constructed of satin finish Type 304 Stainless Steel

FLANGE

- heliarc welded to bar

- 3" (76.2mm) diameter with 3 mounting holes

- 0.078" (1.98mm) - 14 gauge wall thickness

- snap on cover application - 0.036" (0.91mm) -20 gauge wall thickness

BAR

- 1-1/2" (38.1mm) round outer diameter

- 1-1/2" (38.1mm) wall clearance

- available in 10" (254mm), 12" (304.8mm), 16" (406.4mm), 18" (457.2mm), 24" (609.6mm), 30" (762mm), 32" (812.88mm), 36" (914.4mm), 42" (1066.8mm) and 48" (1219.2mm) lengths -constructed of 0.049" (1.25mm) - 18 gauge wall thickness

STANDARDS

- exceeds HUD, HEW, FHA and other Federal and local codes during normal conditions, when properly installed. Withstands 300 Ibs of pressure.