HEAVY-DUTY STAINLESS STEEL GRAB BARS (cont'd.)

Concealed Grab Bars

MEETS ADA REQUIREMENTS

CONCEALED 1-1/4" GRAB BAR

- surface mount, concealed screw mount application

- includes #10 x 2" (50.8mm) stainless steel installation screws with matching finish screw heads

- available in PVC poly bag with header card attached-retail package (prefix 03)

- constructed of white vinyl powder coated finish type 304 Stainless Steel

FLANGE

- heliarc welded to bar - 3" (76.2mm) diameter with 3 mounting holes - 0.078" (1.98mm) - 14 gauge wall thickness, - snap on cover application - 0.036" (0.91mm) -20 gauge wall thickness

BAR

- 1-1/4" (31.75mm) round outer diameter

-1-1/2" (38.1mm) wall clearance - available in 12" (304.8mm), 16" (406.4mm), 18" (457.2mm), 24" (609.6mm), 36" (914.4mm), 42" (1066.8mm) and 48" (1219.2mm) lengths - 0.049" (1.25mm) - 18 gauge wall thickness

STANDARDS

CONCEALED 1-1/4" GRAB BAR

- surface mount, concealed screw mount application

- includes #10 x 2" (50.8mm) stainless steel installation screws with matching finish screw heads

- available in PVC poly bag with header card attached-retail package (prefix 03-)

- constructed of highly polished Solid Brass with protective lacquer finish

FLANGE

- heliarc welded to bar - 3" (76.2mm) diameter with 3 mounting holes - construction 0.078" (1.98mm) - 12 gauge wall thickness - snap on cover application - 0.036" (0.91mm) -19 gauge wall thickness

BAR

-1-1/4" (31.75mm) round outer diameter

-1-1/2" (38.1mm) wall clearance - available in 12" (304.8mm), 16" (406.4mm), 18" (457.2mm), 24" (609.6mm), 30" (762mm), 32" (812.88mm) and 36" (914.4mm) lengths -constructed of 0.049" (1.25mm) - 16 gauge wall thickness