 |
 |
03-C220012CB, 03-C220016CB, 03-C220018CB,
03-C220024CB, 03-C220030CB CONCCALED
1-1/4" GRAB BAR
- surface mount, concealed screw mount application
- includes #10 x 2" (50.8mm) stainless steel
installation screws - available in PVC poly bag with header
card
attached-retail package (prefix 03-)
- constructed of solid brass
FLANGE
- heliarc welded to bar
- 3" (76.2mm) diameter with 3 mounting holes
- 0.078" (1.98mm) - 12 gauge wall thickness, chrome
plated 5olid Brass
- snap on cover application - 0.03565" (0.91mm)
- 19 gauge wall thickness
BAR
-1-1/4" (31.75mm) round outer diameter
-1-1/2" (38.1mm) wall clearance - available in
12" (304.8mm), 16" (406.4mm), 18" (457.2mm), 24" (609.6mm) and
30" (762mm)
- 0.049" (1.25mm) - 16 gauge wall thickness, highly
polished Solid Brass with protective lacquer finish |
 |
 |
01-120012, 01-120016,
01-120018, 01-120024, 01-120030, 01-120032, 01-12003, 01-120042, 01-120048, 01-1248CP,
01-12005R, 01-12005L, 01-120010, 01-120015, 01-120020, 01-1225R, 01-1225L, 01-1230R,
01-1230L, 01-1235R, 01-1235L, 01-120040, 01-120045, 01-120052, 01-120055, 01-120060,
01-1260S, 01-1265R, 01-1265L, 01-120070, 01-1275R, 01-1275L, 01-120080, 01-1280FV,
01-120085, 01-1285PH EXPOSCD 1-1/4"
GRAB BARS
- surface mount, exposed screw mount application
- includes #10x2" (50.8mm) stainless steel
installation screws
- Type 304 Stainless Steel, polished to a #4 satin finish
FLANGE
- flange and center post (if applicable) are heliarc welded
to bar
- 3" (76.2mm) diameter with two mounting holes
- 1/8" (3.18mm) -11 gauge wall thickness
BARS
-1-1/4" (31.75mm) round outer diameter
-1-1/2" (38.1mm) wall clearance
- available in various lengths and angles - please refer to
our Grab Bar catalog
- 0.050" (1.27mm) - 18 gauge wall thickness
STANDARDS
- exceeds HUD, HEW, FHA and other Federal and local codes
during normal conditions, when property installed |
