HEAVY-DUTY STAINLESS STEEL GRAB BARS (cont'd.)

Concealed Grab Bar

MEETS ADA REQUIREMENTS

01-C120018,01-C120024,

01-C120030,01 -C1 20032,

01-C120036,01-C120042,

01-C120048, 01-C1248CP,

01-C12005R, 01-C12005L,

01-0120010,01-0120015,

01-C120020,01-C1225R, 01-C1225L,

01-C1230R, 01-C1230L, 01-C1235R,

01-C1235L, 01-C120040,

01-C120045,01-C120052,

01-C120055,01-C120060,

01-C1260S,01-C1265R,01-C1265L,

01-C120070,01-C1275R,01-C1275L,

01-C120080,01-C1280FV,

01-C120085,01-C1285PH

CONCEALED 1-1/4" CRAB BARS

- surface mount, concealed screw mount application

- includes #10 x 2" (50.8mm) stainless steel installation screws

- Type 304 Stainless Steel, polished to a #4 satin finish

FLANGES

- mounting plate and center post (if applicable) are heliarc welded to bar

- 3" (76.2mm) diameter snap flange mounting plate

- construction: Mounting Plate - 1/8" (3.18mm) - 11 gauge wall thickness Snap Flange Cover Plate Escutcheon - 1/32" (0.79mm) - 21 gauge wall thickness

BARS

- 1-1/4" (31.75mm) round outer diameter

-1-1/2" (38.1mm) wall clearance - available in various lengths and angles - please refer to our Grab Bar catalog

- 0.050" (1.27mm) - 18 gauge wall thickness

STANDARDS

- exceeds HUD, HEW, FHA and other Federal and local codes during normal conditions, when properly installed