| 01-130012,01-130016,01-130018,
01-130024,01-130030,01-130032, 01-130036,01-130042,01-130048, 01-1348CP,01-13005R,
01-13005L, 01-130010,01-130015,01-130020, 01-1325R,01-1325L, 01-1330R,
01-1330L,01-1335R,01-1335L, 01-130040,01-130045,01-130052, 01-130055,01-130060,01-1360S,
01-1365R,01-1365L, 01-130070, 01-1375R,01-1375L,01-130080, 01-1380FV,01-130085,01-1385PH |
|
01-130012,
01-130016, 01-130018, 01-130024, 01-130030, 01-130032, 01-130036, 01-130042, 01-130048,
01-1348CP, 01-1300SR, 01-1300SL, 01-130010, 01-130015, 01-130020, 01-132SR, 01-132SL,
01-1330R, 01-1330L, 01-133SR, 01-133SL, 01-130040, 01-130045, 01-130052, 01-130055,
01-130060, 01-1360S, 01-136SR, 01-136SL, 01-130070, 01-137SR, 01-137SL, 01-130080,
01-1380FV, 01-13008, 01-1385PH EXPOSED
1-1/2" GRAB BARS
- surface mount, exposed screw mount application
- includes #10 x 2" (50.8mm) stainless steel
installation screws
- Type 304 Stainless Steel, polished to a #4 satin finish
FLANGE
- 3" (76.2mm) diameter with two mounting holes
- flanges and center post (if applicable) are heliarc
welded to bar
- 1/8" (3.18mm) - 11 gauge wall thickness
BARS
- 1 1/2" (38.1mm) round outer diameter
- 1 1/2" (38.1mm) wall clearance
- available in various lengths and angles - please refer to
our Grab Bar catalog
- 0.050" (1.27mm) - 18 gauge wall thickness
STANDARDS
- exceeds HUD, HEW, FHA and other Federal and local codes
during normal conditions, when properly installed |
