| PRODUCT
SELECTION GUIDE |
PRODUCT DESCRIPTION |
COMPATIBLE SUBSTRATES |
REMARKS |
COLOR/ TEXTURES FINISHES |
SPECIFICATION GUIDE |
 |
TEX•COTE XL-70 TEX-COTE
XL-70 HIGH- PERFORMANCE INDUSTRIAL MAINTENANCE COATING A solvent-base coating using a
VTACL resin plasticizer and extenders. Spray or Roll-On Formulation |
Masonry, Concrete, Concrete Blocks, Bricks,
Cement Piaster, Stucco. |
A premium product for application over
damp,cured or uncured concrete. Complies with California Air Resources Board Rule 1113. |
COLORS: 16 Standard TCA Colors. TEXTURES:
Smooth, Fine. Coarse, XX(Extra Coarse) |
• Surface shall be clean and prepared
according to manufacturer's written recommendations. •
Consult TCA on the use of primer.
• Coverage rate of XL-70 shall be according to
manufacturer's written specifications.
• Consult TCA if form oils and/or curing compounds are
present. |
 |
TEX•COTE 600 TEXTURED
COATING A water-base, textured coating with elas-tomeric properties having excellent
adhesion and flexibility. Spray or Roll-On
Formulation |
Masonry, Concrete, Concrete Blocks, Cement
Plaster, Bricks, Metal, Cement Board, Overlaid Plywood. |
Over 32 YEARS OF PROVEN PERFORMANCE over many
types of substrates in most geographical climates throughout the world. Fast dry and ideal
ror module-type construction. Complies with California Air Resources Board Rule III 3. |
COLORS: 16 Standard TCA Colors. TEXTURES:
Smooth, Fine, Coarse, XX(Extra Coarse) and Lace Finish. |
• Type of substrate used, preparation
and application shall be in accordance with TCA's written specifications. |
| TEX•-COTE 100 TEXTURED
COATING A soh/ent-base, polyester resin system reinforced with specially blended organic
fibers. Spray or Roll-On Formulation |
Masonry, Concrete, Concrete Blocks, Cement
Plaster, Brick, Metal, Cement Board, Overlaid Plywood. |
Over 32 YEARS OF PROVEN PERFORMANCE over many
types of substrates in most geographical climates throughout the world. Fast dry and ideal
ror module-type construction. Complies with California Air Resources Board Rule 1113. |
COLORS: 16 Standard TCA Colors. TEXTURES:
Smooth, Fine, Coarse, XX(Extra Coarse) and Lace Finish. |
• Surface shall be clean and dry and
prepared according to manufacturer's recommendations. • Surface shall be primed according to manufacturer's written
specifications.
• Coverage rate shall be according to manufacturer's
written specifications. |
| TEX•COTE
S-T-R-E-T-C-H 100% Acrylic latex-base elastomeric resin water-based
high-performance material. |
Masonry, Cement Plaster Block, Various Types
of Wood Sliding, Poured/Precast Cement, Galvanized Metal, Asbestos Board (not for trim
& plywood). |
Approximately 400% elongation. Hides hairline
cracks. 60% Solids. Appfy by brush, roller, or airtess. Complies with California Air
Resources Board Rule 1113. |
COLORS: 16 Standard TCA Colors. TEXTURES:
Smooth texture. |
• Type of substrate used, preparation
and application shall be in accordance with TCA's written specifications. |
 |
RAINSTOPPER 100/200 CLEAR
solvent-based penetrating sealers containing Plaz-Tex. Outperforms competitive cfear
sealers. Will not yellow or stain surface. NOTE: RAINSTOPPER 200 has slight gloss. |
Masonry, Concrete, Concrete Blocks, Exposed
Aggregatos, Bricks, Stucoo, Wood. |
RAINSTOPPER 100 is a WATER REPELLENT SEALER
for use above grade on concrete, masonry and wood surfaoes. RAINSTOPPER 200 is a heavy
duty WATER REPELLENT SEALER for more porous surfaces. Complies with California Air
Resources Board Rule 1113. |
COLORS: Clear RAINSTOPPER 200 has slight
gloss and darkening of surface. |
• Shall have at least 7-year
Weatherometer Test. - Shall provide water repellency over concrete block after 250 hours
of concentrated ultraviolet light at 140°F. •
See 07180/TEX BuyLine 6244 |
| RAINSTOPPER 400/500 RAINSTOPPER
MASONRY STAINS RAINSTOPPER 400 a solvent-base semi-transparent or RAINSTOPPER 500 a
solvent-base opaque stain provides moisture resistance and color tones to the masonry
substrate. |
Masonry, Concrete, Concrete Blocks,
Architecturer Concrete, Bricks, Cement Stucoo. |
RAINSTOPPER MASONRY STAINS do not hide the
natural beauty of the substrate but rather color tones it. RAINSTOPPER MASONRY STAINS are
not a paint and will not chip, flake or peel. Complies with California Air Resources Board
Rule 1113. |
COLORS: 16 Standard TCA Colors. For Special
Colors contact your TCA Representative. |
• Shall have at least 7-year
Weatherometer Test. • Shall provide water
repellency over concrete block after 250 hours of concentrated ultraviolet light at
140°F.
• See 07180° TEX BuyLine 6244 |
| RAINSTOPPER 600/1500
RAINSTOPPER 600 - 6% Siloxane Sealer RAINSTOPPER1500 - 15% Siloxane Sealer RAINSTOPPER
140/120 RAINSTOPPER 140 - 40% Silane Sealer RAINSTOPPER 120 - 20% Silane Sealer |
Masonry, Concrete, Stone, Wood, Brick,
Stucco, Limestone, Aggregates, Marble, Architectural Concrete |
RAINSTOPPER SILOXANE AND SILANE are chemical
treatments which causes the penetrated layer to repel salt, water, and staining substances
while water vapor passes freely out of the treated substrate. |
COLORS: Clear |
• Request written application
instructions on RAINSTOPPER SILOXANE. • Surface
shall be clean and prepared according to manufacturer's written specifications.
• See 07180/TEX BuyLine 6244 |
 |
GRAFFITI GARD TEX-COTE
GRAFFITI GARD IIIS SYSTEM. For exterior or interior use. A clear gloss, two-component
solvent-base urethane system which serves as a shield against penetrating defacement
material. Recommened for use where frequent graffiti removal is required. |
Concrete, Brick, Stucco, Concrete Block,
Metal, Gypsum Wallboard, Plaster and most Painted Surfaces. |
GRAFFITI GARD IIIS is a premium
high-performance coating system recommended in areas where extreme chemical and graffiti
resistance is required. Graffiti Paste Cleaner is used for removing stains and defacement
material. |
COLORS: TCA's Ty-Cote is available in 16
Standard Colore or Clear. |
• Request written application
instructions on Graffiti Gard™ IIIS System. Application instructions will vary
depending on substrate • GRAFFITI GARO IUS
requires TCA's pig-mented or clear Ty-Cote over porous substances such as block, brick and
most painted surfaces. |
| |
SACRIFICIAL GRAFFITI GARD
SYSTEM. A new water-base, low cost, economical system to provide gr application
prooeduras. |
 |
STRATA-GRIP TEX-COTE
STRATA-GRIP A multipurpose urethane/acrylic-base deck coatingfor both vehicular and
pedestrian traffic, excellent skid, abrasion, and mildew resistance. |
Concrete, Metal, Wood and Other TCA Approved
Substrates |
TEX-COTE STRATA-GRIP is a one-component,
ready to use coating reinforced with rubber additive. Complies with California Air
Resources Board Rule III 3. |
COLORS: STRATA-GRIP comes in a variety of
standard colors. Application by brush, roll or spray. |
• Request more complete technical data
from your local TCA office or representative. |
 |
MULTI TEXTURE/COLOR
TEX-COTE INTERIOR/EXTERIOR WALLCOAT1NG SYSTEM. A seamless interior/exterior wall
finish applied by spray application. |
Drywall, Concrete, Cement
Plaster, Plastic, Brick and Other TCA Approved Substrates |
A new high tech water-base system
for dramatic interior or durable exterior use. Complies with California Air Resources
Board Rule III 3. |
MULTI TEXTURE/ COLOR TEX-COTE
comes in a variety of standard colors and patterns: SPLATTER, LACE, and BARK. Customized
patterns available. |
• TCA has complete detailed
specifications for various patterns and installation procedures. • See 09950fTEX BuyLine 7460 |
