Textured Coatings of America
TEX-COTE
TEX-COTE - Page 12
TEX-COTE
![]() SACRIFICIAL GRAFFITI GUARD® (One Coat System) A specially formulated, water-based resin. This system comes in clear, dries to a flat, non gloss finish and may be utilized in environmentally sensitive applications. This system may be applied directly to the substrate or over Graffiti Gard TY-COTE (clear and pigmented) or other approved coatings.
GRAFFITI GARD® TY-COTE (Base Coat) Ty-Cote is a clear or pigmented base coat recommended for use with Sacrificial Graffiti Guard and Permanent Graffiti Gard IIIS Systems.
PERMAMEIVT GRAFFITI GARD IIIS (Two Coat Urethane System) A two-component, aliphatic urethane, clear system. This system may be applied over Graffiti Gard Ty-Cote (clear and pigmented) or other approved coatings. This system has a gloss finish and provides mulitple cleanings under proper removal procedures (see technical data sheet).
GRAFFITI GARD and GRAFFITI GUARD are registered trademarks of Textured Coatings of America, Inc. ©Textured Coatings of America, Inc. 1997. All Rights Reserved.
TECHNICAL DATA - The information and suggestions contained herein are believed to be accurate based upon our current knowledge and experience. However, such information and suggestions may not be pertinent, suitable or complete as to any particular construction, substrate, application, application process or conditions. SELLER HEREBY DISCLAIMS ALL EXPRESS AND IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. It shalt be buyer's responsibility to ascertain th e suitability of any mentioned products and the completeness of any information and/or suggestions for its or its customers use or uses. |






