Series 100 Regular: A clear, penetrating water repellent sealer for internal and external protection. Series 100 contains PLAZTEX, a hydrocarbon plasticizer which is water white, non-gloss, stain and oxidation resistant.

May be used for concrete, cement plaster, painted surfaces, natural stone panels, brick, wood and other nonporous surfaces. Solids content is 8% minimum of sealer material.

Series 200, Heavy Duty Clear: Heavy Duty is specially formulated for a more porous surface. Upon drying, the surface is enriched and slightly darkened with a low sheen.

Recommended over normal weight block systems, slump stone, split face block, cinder block, adobe block, lightweight concrete, and exposed aggregate systems. Two (2) coat water repellent system which requires a 24-hour curing period under ideal weather conditions prior to second coat application. Solids content is 20% minimum of sealer material.

Series 400 Semi-transparent; and Series 500, Opaque Stains: A solvent based resin system which penetrates into the masonry surface for water repellency, aesthetic staining, greater depth of color and allows moisture vapor to escape from the surface.

Recommended for concrete systems, cement stucco, natural stone, architectural concrete, bush-hammered concrete, exposed aggregate systems, brick and normal weight concrete block.

Allow 24-hour curing between coats when roller applied. Solids content is 25% minimum of sealer material.

Series 600 and Series 1500 Slloxane Clear Sealers: A one component penetrating sealer. This product reacts chemically with the substrate to form a repellency to salt and water while still allowing the substrate to remain permeable to water vapor.

Series 1500 meets NCHRP-244 Test Method Requirements for concrete deck sealers. Request more detailed technical data from manufacturer.

Solids content for Series 600 is 6% siloxane. For Series 1500, it is 15% siloxane.

Series 140 and Series 120Sllane Clear Sealers:

RAINSTOPPER^® Silane is a chemical treatment which causes concrete, masonry, limestone or wood to become repellent to salt and water. It is available in two grades for concrete, masonry, limestone and one grade for wood.

RAINSTOPPER^® Silane has an excellent performance record. Testing has proven that it is superior to digomeric poly siloxanes, stéarates, siliconates, silicates, urethanes, butadienes, chlorinated rubber, epoxies, and oils.

RAINSTOPPER^® 140 - Our premium grade silane weatherproofing product contains 40% Alkyltrialkoxy Silane in Mineral Spirits. It is used to protect and maintain bridges, parking garages, airport pavements, industrial plants, buildings and other concrete and masonry structures in the most severe environments. RAINSTOPPER^® 140 penetrates up to 1/2 inch with each application.

RAINSTOPPER^® 120-Our high grade silane water repellent product contains 20% Alkyltrialkoxy Silane in Mineral Spirits. It is used to protect and maintain bridges, buildings, parking garages, pavements, plants, and other brick and concrete structures in the most severe environments. RAINSTOPPER^® 120 penetrates up to 1/4 inch with each application.

RAINSTOPPER^® Siloxane and Silane Sealers protect and preserve the substrate without altering the surface texture or appearance. Substrates which can be treated include limestone aggregates, gravel, concrete, stone, wood, brick, masonry, flagstone, paper, sandstone, limestone, marble, stucco, precast concrete, architectural concrete and synthetic stone.

After being chemically treated, these substances become highly resistant to staining, spalling, weathering, efflorescence, water intrusion, salt intrusion, fungi and mildews, deterioration, freeze thaw scaling and reinforcing steel corrosion.

Coverage Rates

The following figures are estimated coverage rates and may vary according to the porosity of surface and surface conditions. Only complete and full saturation with the sealer material will satisfy the surface porosity of the substrate being treated.

Series 100, Regular: (one coat)

*Cement stucco color coats may bleed in the presence of solvent based materials. Provide a test area patch utilizing the sealer material to determine cement stucco reaction to sealer application. Consult manufacturer for recommendation.

Series 200, Heavy Duty: (two coats)

*contact the manufacturer for recommendations over light weight block.

Series 400 and 500: (two coats)

Series 600 and 1500: (one coat)

Technical Data

Series 100/200

Series 100

Series 100/200/400 Additional Performance Data