| TEX·COTE® Multi
Texture/Color Wall Coating System Technical Data TECHNICAL
DATA: TEX·COTE® MULTI TEXTURE/COLOR (MT/C) Wall Coating System
passes Federal Test TTC-555b test criteria and performs well for a variety of other
testing procedures (i.e. NFPA, ASTM) as shown below.
PHYSICAL CONSTANTS OF MT/C BASE COAT:
Latex System: Urethane Acrylic Based
Weight Per Gallon: 12.2 Ibs. typical
V.O.C. (GMS/liter minus water): 74.4 typical
Volume Solids: 55.89%
PHYSICAL CONSTANTS OF MT/C FINISH COAT:
Latex System: Acrylic Based
Weight Per Gallon: 10.0 Ibs. typical
V.O.C. (GMS/liter minus water): 162.5
Volume Solids: 51.80%
TEST DATA TEX·COTE® MULTI
TEXTURE/COLOR SYSTEM:
- Fire-ASTM E-84 Class A: Flame Spread 5, Smoke Developed 5
NFPA: Class A UBC; Class 1
- Water Vapor Permeability ASTM E 96 (Procedure A): 13.35
(Perm. In.) ASTM D 1653: 17.40 (Perm. In.)
- Mildew Fungus Resistance ASTM D 3273 (TTP 29): No
Disfigurement ASTM G21-90 (without clear glaze): 0 Growth ASTM G21-90 (with clear glaze):
0 Growth
- Stain Resistance Modified ANSI A 118.6-85: No Visible Stains
ASTM 1308-87: No Visible Staining from mild acids, chemicals, oils, food
- Flexibility - ASTM 522-89 Mandrel: No Cracking
- Scrub Resistance ASTM 2486-89 (without clear glaze): Pass
9,000 cycles ASTM 2486-89 (with clear glaze): Pass 11,000 cycles
- Abrasion Resistance - ASTM 986: Pass 1,000 cycles
- Impact Resistance -Type D Durometer: 40
|
 |
Technical
Data ADDITIONAL TEST ON MT/C
FINISH COAT:
- Twin ARC Weatherometer (Hours): 5,000 Hours
- Federal Test TTC-555b: Passes
- Wind Driven Rain Test (98 MPH/24 Hours): Passes
- Salt Spray Test - ASTM B-1 17-64: 300 Hours
- Alkali Resistance GSA Exception #1 to TTC-555b: Passes
AVAILABILITY AND COST:
Available nationally through representative network. Call
the manufacturer for location of nearest representative.
WARRANTY:
Upon completion of application of coating in accordance
with the manufacturer's recommendations, Textured Coatings of America, Inc. will extend
its limited commercial warranty for product replacement as a result of defect in the
material. The manufacturer must be notified prior to the application of the coating and
the application must be in compliance with the manufacturer's recommendations for
installation. Textured Coatings of America, Inc. shall have no obligation to or otherwise
participate in labor or cost associated with effecting repairs. Specimen copy of material
warranty available upon request.
MAINTENANCE:
No particular maintenance is required, however, should any
of the product become soiled, simply scrub with a sponge and mild cleaning detergent which
will help remove stains and dirt from the textured surfaces.
TECHNICAL SERVICES:
Technical services are available from the manufacturer's
facilities or sales representatives throughout the United States. Textured Coatings of
America. Inc. Research and Development Department will provide special specifications upon
request.
| Guide Specification available
upon request |
|
