| Factory-mounted Unit
Control Acoustically designed for
location near occupied building spaces, one or more compact commercial self contained
air conditioners are commonly placed in an equipment
room on each floor. Supply air is ducted to VariTrane VAV terminals.
Alternatively, these units can be used with constant
volume air supply systems.
Commercial Self Contained units equipped with UCMs can be connected
directly to a Tracer Summit BCU or Tracer 100 series
controller. These systems provide control, monitoring, and diagnostics
capabilities.
For more information about Commercial Self Contained Units, refer
to Trane publication PKG-DS-6.
lntelliPak Rooftop Units
The 20 to 130-ton IntelliPak Rooftop is a self contained heating and
cooling air handling unit. The IntelliPak can be
configured as either constant volume or variable
air volume system control. The IntelliPak UCM is factory-installed on each
unit, and can be connected to a Tracer Summit BCU or a
Tracer 100 series controller via a Trane Communication Interface (TCI). Each
system provides control, monitoring, and diagnostics for the rooftop unit.
For more information about lntelliPak Rooftops, refer to Trane publication RT-DS-8.
Voyager Rooftop Units
The 3 to 50-ton Voyager Rooftop unit is a self contained heating and cooling
air conditioner normally installed on a building’s
roof. We designed the Voyager Rooftop to compete in the price-competitive market
of light commercial packaged rooftops. The Voyager
can be factory-configured for either constant volume or variable air volume (27 1/2
to 50-ton Voyager Commercial only) system control.
The Voyager Micro is applied on all Trane Voyager Rooftops and can be connected to
a Tracer Summit BCU or a Tracer 100 series controller via a TCI. Each system provides
control, monitoring, and diagnostics for the rooftop
unit.
For more information about Voyager
Rooftops, refer to Trane publications RT-DS-9.
Air Handlers
Trane’s indoor, outdoor, and custom air handlers are available with
complete turnkey factory-packaged controls systems.
Universal PCMs, PCMs, sensors, actuators, and other control devices
(including starters and VFDs) are factory-engineered,
mounted, wired, and tested.
Six standard factory PCM programs
are available. Custom programs can be written and
factory-downloaded to meet special building requirements, Simple connections for
power, piping, and ductwork, and a basic startup
sequence help minimize labor and expedite construction cycles. Each air
handler performs fully standalone, or can be tied with
a pair of wires to a Trane Tracer building management system. Trane’s
ICS can play a key role in addressing today’s
hottest HVAC issues like indoor air quality, energy efficiency, and comfort.
VariTrac Changeover-Bypass Zoning System
The Varitrac Central Control Panel (CCP) provides coordination, monitoring,
and diagnostics for the VariTrac zone control system.
The CCP also communicates with the VariTrac zone dampers to determine space
heating and cooling requirements. The VariTrac Zoning System can communicate
with the Tracer 100 series building controllers and the
Tracker building control panel.
VAV Command Unit
The Tracer 100 series VAV Command Unit system provides control,
monitoring, and diagnostics of Trane VAV terminal units. Through the VAV Command
Units, the Tracer 100 series panel can maintain and
monitor individual zone comfort requirements. The Tracer panel also makes the
comfort system flexible to occupants’ cooling and
heating requirements by grouping VAV terminal units together through software.
|
