Air Cooled Liquid Chillers - Page 4

Following our IntelliPak^® Rooftop’s lead, Trane’s 20-60 ton chillers are moving into the 21st century. The time-tested and proven control technology that makes our IntelliPak rooftop superior has been applied to the IntelliPak^® Air Cooled chiller. This is a truly advanced chiller.

Standard Features

• Microprocessor Control The IntelliPak chiller’s Unit Control Module (UCM) is an innovative, modular microprocessor control design. It coordinates the actions of the chiller in an efficient manner and provides stand-alone operation of the unit. A Human Interface (HI) Panel is a standard component of the IntelliPak Chiller. Access to all unit controls is via the Human Interface Panel.
• Factory Run Testing In addition to outstanding efficient performance, IntelliPak Chillers have established a reputation for reliable operation. Aside from the individual component tests, all Trane 20 through 60-ton chillers are factory run tested with water running through the evaporator to confirm proper operation. Control operation and current draw are both monitored to assure safe, reliable operation.

Other Standard Features

• Trane 3-D^® Scroll compressors
• Advanced motor protection
• 300 psi waterside evaporator
• Evaporator insulation (¾-inch Armaflex II or equivalent)
• Evaporator heat tape (thermostat controlled)
• Condenser coil guards
• Operation down to 30°F without additional wind baffles or head pressure control
• Loss of flow protection
• Kw demand limiting
• UL and CSA approval available
• Packed stock availability
• Control Power Transformer
• Low ambient lockout
• Plain English (Spanish/French) Human Interface display
• Smart Lead/Lag operation
• Integrated chilled solution pump control
• Selectable process or comfort control algorithm
• External auto/stop
• Electronic low ambient damper control integrated into UCM

Optional Features

• Controls for ice making operation

Miscellaneous Options

• Trane Communications Interface Module (TCI)
• Unit Mounted Disconnect
• Isolators
• Superheat/Sub-Cooling Module
• Hot Gas Bypass
• Generic B A S Modules with 0-10 v. analog input/output, 0-5 v analog input/binary output
• Remote Human Interface Panel (RHI)
• Remote Setpoint Potentiometer
• Zone Sensor (Chilled Solution Reset)
• Phase/Voltage Current Monitoring
• Flow Switch
• Copper Fin Condenser Coils
• Electronic Low Ambient Damper(s)
• Inter-Processor Communication Bridge (IPCB)
• Ice building control
• Other Options

In addition to all of these options, Trane can offer in-house design for many applications, including special coil coating.