| Features and Benefits 
Excellent Part-Load Efficiency
• The Scroll compressor’s unique design allows it
to be applied in a passive parallel manifolded piping scheme, something that a
"recip" just doesn’t do very well.
When the unit begins stage back at part load it still has
the full area and circuitry of its evaporator and condenser coils available to transfer
heat. In simple terms this means superior part-load efficiencies (IPLV) and lower unit
operating costs.
FC Fans with Inlet Guide Vanes
• Trane’s forward-curved fans with inlet guide
vanes pre-rotate the air in the direction of the fan wheel, decreasing static pressure and
horsepower, essentially unloading the fan wheel. The unloading characteristics of a Trane
FC fan with inlet guide vanes result in superior part load performance.
Rigorous Testing
• All of Voyager’s designs were rigorously rain
tested at the factory to ensure water integrity.
• Actual shipping tests are performed to determine
packaging requirements. Units are test shipped around the country. Factory shake and drop
tested as part of the package design process to help assure that the unit will arrive at
your job site in top condition.
• Rigging tests include lifting a unit into the air
and letting it drop one foot, assuring that the lifting lugs and rails hold up under
stress.
• We perform a 100% coil leak test at the factory. The
evaporator and condenser coils are leak tested at 200 psig and pressure tested to 450
psig.
• All parts are inspected at the point of final
assembly. Sub-standard parts are identified and rejected immediately.
• Every unit receives a 100% unit run test before
leaving the production line to make sure it lives up to rigorous Trane requirements.
Ease of Installation
Contractors look for lower installation (jobsite) costs.
Voyager’s conversionless units provide many time and money saving features.
Conversionless Units
• The dedicated design units (either downflow or
horizontal) require no panel removal or alteration time to convert in the field — a
major cost savings during installation.
Improved Airflow
• U-shaped airflow allows for improved static
capabilities. The need for high static motor conversion is minimized and time isn’t
spent changing to high static oversized motors.
Single Point Power
A single electrical connection powers the unit.
Micro™
• The function of the Micro replaces the need for
field installed anti-shortcycle timer and time delay relays. The Micro ensures that these
controls are integral to the unit. The contractor no longer has to purchase these controls
as options and pay to install them.
• The wiring of the low voltage connections to the
unit and the zone sensors is as easy as 1-1, 2-2, and 3-3. This simplified system makes it
easier for the installer to wire. |
