Packaged Rooftop Air Conditioners -RT-DS-9 (Trane Company (The))

Weights

Table 34-1 — Approximate Operating Weights — Lbs.2

	Basic UnitWeights (1)
Unit	YC	YC	TC	TE
Model	Low Heat	High Heat
**D330	3650	4012	3520	3553
**H330	3650	4077	3565	3598
**D360	3730	4092	3600	3633
**H360	3730	4142	3600	3633
**D420	3815	4177	3685	3718
**H420	3815	4227	3685	3718
**D480	4665	4785	4440	4475
**H480	4690	4815	4440	4475
**D600	4835	4955	4610	4645
**H600	4860	4985	4610	4645

Notes:

1. Basic unit weight includes minimum HP Supply Fan motor.

2. Optional high static and high efficiency motor weights are in

addition to the standard motor weight included in the basic unit

weight.

Table 34-2 — Point Loading Percentage of Total Unit Weight¹

rtds933b.gif (4063 bytes)

POINT LOADING-% OF TOTAL UNIT WEIGHT
A	B	C	D	E	F
21	23	12	16	17	12

1. Point Loading is identified with corner A being the corner with the compressors. As you move clockwise around the unit as viewed from the top, mid-point B, corner C, corner D, mid-point E and corner F.

Table 34-3 — Component Weights

Weights of Optional Components
			Hi-Static/				Variable Frequency Drives(VFD’s)					Factory	Roof Curb Weights
			Hi-Eff	0-25%		Inlet				Thru-the	Non-Fused	GFI with
Unit	Barometric	Power	Supply Fan	Manual		Guide			Service	Base	Disconnect	Disconnect
Model	Relief	Exhaust	Motors(2)	Damper	Econo	Vanes	W/O Bypass	With Bypass	Valves	Electric	Switch	Switch	Lo	Hi
**D330	110	165	120	50	260	55	85	115	11	6	30	85	310	330
**H330	145	200	120	50	285	55	85	115	11	6	30	85	310	330
**D360	110	165	120	50	260	55	85	115	11	6	30	85	310	330
**H360	145	200	120	50	285	55	85	115	11	6	30	85	310	330
**D420	110	165	120	50	260	55	115	150	11	6	30	85	310	330
**H420	145	200	120	50	285	55	115	150	11	6	30	85	310	330
**D480	110	165	125	50	290	70	115	150	18	6	30	85	365
**H480	145	200	125	50	300	70	115	150	18	6	30	85	365
**D600	110	165	125	50	290	70	115	150	18	6	30	85	365
**H600	145	200	125	50	300	70	115	150	18	6	30	85	365

Table 34-4 — Minimum Operating Clearances for Unit Installation

		CondenserCoil²	ServiceSide
	Econo/ExhaustEnd	End/Side	Access
SingleUnit¹	6Feet	8Feet/4Feet	4Feet
MultipleUnit^1,3	12Feet	16Feet/8Feet	8Feet

Notes:

1. Horizontal and Downflow Units, all sizes.

2. Condenser coil is located at the end and side of the unit.

3. Clearances on multiple unit installations are distances between units.

Packaged Rooftop Air Conditioners - RT-DS-9 - Page 933