Packaged Rooftop Air Conditioners - RT-DS-9 - Page 939

Zone Sensors

Shall be provided to interface with the Micro unit controls and shall be available in either manual, automatic programmable with night setback, with system malfunction lights or remote sensor options.

This field installed circuit board shall provide interface with electromechanical thermostats or automation systems. Not available with VAV system control.

Differential Pressure Switches

This field installed option allows dirty filter indication. The dirty filter switch will light the Service LED on the zone sensor and will allow continued unit operation.

Electronic Time Clock

This field installed accessory allows up to 4 units night set-back and unoccupied functions when using a standard (Dual Setpoint) zone sensor module.

Remote Potentiometer

A remote potentiometer shall be available to remotely adjust the unit economizer minimum position.

High Temperature Thermostats

Field installed, manually resettable high temperature thermostats shall provide input to the unit controls to shut down the system if the temperature sensed at the return is 135 F or at the discharge 240 F.

Reference Enthalpy Kit

Field installed enthalpy kit shall provide inputs for economizer control based upon comparison of the outside air stream to a definable enthalpy reference point. May also be factory installed.

Comparative Enthalpy Kit

Field installed enthalpy kit shall provide inputs for economizer control based upon comparison of the enthalpies of the return and outdoor air streams. Also available factory installed.

LP Conversion Kit

Field installed conversion kit shall provide orifice(s) for simplified conversion to liquefied propane gas. No change of gas valve shall be required.

BAYSENS006* — Zone Sensor has one temperature setpoint lever, heat, off or cool system switch, fan auto or fan on switch. Manual changeover. These sensors are for CV units only.

BAYSENS008* — Zone Sensor has two temperature setpoint levers, heat, auto, off, or cool system switch, fan auto or fan on switch. Auto changeover. These sensors are used with CV units.

BAYSENS010* — Zone Sensor has two temperature set point levers, heat, auto, off, or cool system switch, fan auto or fan on switch. Status indication LED lights, System on, Heat, Cool, and Service are provided. These sensors are used with CV units.

BAYSENS013* — Zone temperature sensor with timed override buttons used with Tracer® Integrated Comfort system.

BAYSENS014* — Zone temperature sensor with local temperature adjustment control and timed override buttons used with Tracer Integrated Comfort system. May also be used for Morning Warm-up setpoint and sensor.

BAYSENS016* — Temperature Sensor is a bullet or pencil type sensor that could be used for temperature input such as return air duct temperature.

BAYSENS017* — Remote Sensor can be used for remote zone temperature sensing capabilities when zone sensors are used as remote panels or as a morning warm-up sensor for use with VAV units or as a zone sensor with Tracer Integrated Comfort system.

BAYSENS019* & BAYSENS020* — Electronic programmable sensors with auto or manual changeover with seven day programming. Keyboard selection of heat, cool, auto fan or on. All programmable sensors have System on, Heat, Cool, Service LED/LCD indicators as standard. Night setback sensors have two occupied, and two unoccupied programs per day. Sensors are available for CV zone temperature control and VAV zone temperature control.

BAYSENS021* — Zone Sensor with supply air single temperature setpoint and AUTO/OFF system  switch. Status indication LED lights, System ON, Heat, Cool, and Service are provided. Sensors are available to be used with VAV units.

BAYSTAT023* — Remote Minimum Position Potentiometer is used to remotely specify the minimum economizer position. Since The Trane Company has a policy of continuous product improvement, it reserves the right to change design and specification without notice. An American Standard Company

The Trane Company

2701 Wilma Rudolph Blvd.

Clarksville, TN 37040

http://www.trane.com