The Elements

CONDUCTORS

	CONDUCTOR CABLE 300 Plated or unplated copper strands around a Kevlar™ core. Kevlar™ minimizes stretching of Cable. Spans up to 40' without center support. Cable is rated for 300 watts at 12 volts and 600 watts at 24 volts. Cable diameter is .125" (3mm).	Tin	CA-501
		Brass	CA-501-BR
		Bright Copper	CA-501-CU
	CONDUCTOR CABLE 500 Plated or unplated copper strands around a Kevlar™ core. Kevlar™ minimizes stretching of Cable. Spans up to 40' without center support. Cable is rated for 500 watts at 12 volts and 1000 watts at 24 volts. Cable diameter is .145" (3.7mm).	Tin	CA-505
		Brass	CA-505-BR
		Bright Copper	CA-505-CU

NB. Cable is shipped in a single length on a spool. Be sure to order twice the run length. Eg. order 20' for a 10' run.

MOUNTING HARDWARE

Stud Ends at one end of the run.		HARDWARE SET Anchors and tensions Cable. Allows for low voltage power feed into front of Anchor. Anchor bases have 1" (25mm) diameter.		Complete Set	Natural Aluminum	CA-301-AL
				Complete Set	Bright Nickel	CA-301-NK
				Complete Set	Brass / Copper	CA-301-BR/CU
				Turnbuckle Pair	Natural Aluminum	CA-302-AL
				Turnbuckle Pair	Bright Nickel	CA-302-NK
				Turnbuckle Pair	Brass / Copper	CA-302-BR/CU
Turnbuckles at the other end of the run.		N.B. Use isolating plates # CA-815 (set of 4) when mounting CA-301 anchors to a metal surface.		Stud End Pair	Natural Aluminum	CA-303-AL
				Stud End Pair	Bright Nickel	CA-303-NK
				Stud End Pair	Brass / Copper	CA-303-BR/CU
				1" ø Lexan Plates (4)	Clear Lexan	CA-815

Power Anchors at one end of the run.		POWER HARDWARE SET Anchors and tensions Cable, and allows for invisible low voltage power feed behind one pair of Anchors. Use only with Teflon Coated Power Cable. Power Anchor bases have 1.5" (38mm) diameter. Turnbuckle bases have 1" (25mm) diameter.		Complete Set	Natural Aluminum	CA-305-AL
				Complete Set	Bright Nickel	CA-305-NK
				Complete Set	Brass / Copper	CA-305-BR/CU
				Power Anchor Pair	Natural Aluminum	CA-308-AL
				Power Anchor Pair	Bright Nickel	CA-308-NK
				Power Anchor Pair	Brass / Copper	CA-308-BR/CU
Trunbuckles at the other end of the run.		N.B. Use isolating plates # CA-823 (set of 4) when mounting CA-305 anchors to a metal surface.		1" ø Lexan Plates (2) &	Clear Lexan	CA-823
				1.5" ø Lexan Plates (2)

Turnbuckles at both ends of the run.		DOUBLE TURNBUCKLE HARDWARE SET Anchors and tensions Cable from both ends of Span. Recommended for spans over 35' (8m). Not available with direct feed. Anchor bases have 1.5" (38mm) diameter. Use isolating plates # CA-815 (set of 4) when mounting CA-306 anchors to a metal surface.		Complete Set	Natural Aluminum	CA-306-AL
				Complete Set	Bright Nickel	CA-306-NK
				Complete Set	Brass / Copper	CA-306-BR/CU
				1" ø Lexan Plates (4)	Clear Lexan	CA-815

CABLE SYSTEMS