architecture - engineering - construction
Translite Systems
Translite Systems
Translite Systems - Page 4
Translite Systems
 |
 |
HEAVY DUTY CEILING BRACKET (PAIR)
Allows Cable to begin span 12" (300mm), 18" (450mm), 24" (600mm),
or 30" (750mm) off mounting surface. Typically ceiling mounted. Bases are ø
4.0" (100mm). Down Rods are ø .75" (19mm). Add length to product code. |
Standard Set (pair) |
12"
Natural Zinc |
CA-523-AL |
| Standard Set (pair) |
12"
Bright Nickel |
CA-523-NK |
| Standard Set (pair) |
12"
Brass / Copper |
CA-523-BR/CU |
| Power
can be fed into the base of the anchor to energize the system. Use only Plenum Rated Cable
(CA-503). |
 |
Turnbuckle Set (pair) |
12"
Natural Zinc |
CA-525-AL |
| Turnbuckle Set (pair) |
12"
Bright Nickel |
CA-525-NK |
| Turnbuckle Set (pair) |
12"
Brass / Copper |
CA-525-BR/CU |
 Bracket
> 12" (300mm)
Zinc plating will complement the Aluminum finish on
other Translite parts.
|
Rods in excess of 12" (304mm) long should be used in conjunction with
hardware sets (order separately) in order to triangulate the cable. When not triangulating the cable, tension can be provided by
ordering Turnbuckle Sets. Power must not be fed through the side with a Turnbuckle
Set. |
 |
Clear |
CA-814 |
 |
 |
|
DIRECTIONAL
WAND WITH 6" CEILING BRACKET
Allows Cable to change direction. Includes Turnbuckle and 36" (1m) of cable.
Typically ceiling mounted. Base is ø 3.5" (89mm). Does not need isolator
plates when mounted to a metal surface. |
Natural
Alum. |
CA-350-AL |
| Bright
Nickel |
CA-350-NK |
| Brass
/ Copper |
CA-350-BR/CU |
|
|
|
|
|
|
 |
 |
DELUXE
DIRECTIONAL CEILING BRACKET
Allows Cable to change direction on the plane parallel to the mounting surface.
Typically ceiling mounted. Base is ø 4.0" (100mm). |
4",
Natural Alum. |
CA4-354-AL |
| 4",
Bright Nickel |
CA4-354-NK |
| 4",
Brass or Copper |
CA-354-BR/CU |
| 6",
Natural Alum. |
CA6-354-AL |
| 6",
Bright Nickel |
CA6-354-NK |
| 6",
Brass / Copper |
CA6-354-BR/CU |
 |
 4"
or 6" |
SUPPORT
BAR
Supports Cable. Recommended option for spans over 40'. Includes 3' (1m) of
1/16" (2mm) aircraft cable. Ceiling mounted. Specify 4" or 6" bridge.
Anchor base is ø 1.25" (32mm). Bar is clear lexan. Specify finish for mounting
hardware.
|
4",
Natural Alum. |
CA4-360-AL |
| 4",
Bright Nickel |
CA4-360-NK |
| 4",
Brass / Copper |
CA4-360-BR/CU |
| 6",
Natural Alum. |
CA6-360-AL |
| 6",
Bright Nickel |
CA6-360-NK |
| 6",
Brass / Copper |
CA6-360-BR/CU |
| Extra
Aircraft Cable |
CA-504 |
INLINE TURNBUCKLES & ISOLATORS
 |
|
INLINE
TURNBUCKLE (PAIR)
Tensions Cable from center of span. Recommended for runs over 60'. Also used to
tension "continuous loop" configurations. Turnbuckle is ø .50" x 3.6"
(13mm x 91mm). 
|
Isolating -
Alum. |
CA-310-AL |
| Isolating -
Nickel |
CA-310-NK |
| Isolating -
Brass / Copper |
CA-310-BR/CU |
| Conductive -
Alum. |
CA4-309-AL |
| Conductive -
Nickel |
CA4-309-NK |
| Cond - Brass
/ Copper |
CA-309-BR/CU |
 |
|
ISOLATOR
(PAIR)
Electrically isolates sections of the Cable Systems. Isolator is .50" x
1.25" (13mm x 32mm).
|
Clear Lexan |
CA-511 |
CABLE SYSTEMS |
